Centershift Lock - Disassemble
Disassembly Procedure
Start By:
- Remove the centershift lock.
- Remove the solenoid valve.
- Remove switch (1) .
Show/hide table
 | |
| Illustration 1 | g01345639 |
- Remove O-ring seal (2) and shims (3) .
Show/hide table
 | |
| Illustration 2 | g01345643 |
- Remove hose assembly (5). Remove fitting (4) and fittings (6) .
Show/hide table
 | |
| Illustration 3 | g01345648 |
- Remove bolts (7) and cap (8) .
Show/hide table
 | |
| Illustration 4 | g01345652 |
- Remove fittings (9). Remove seal (10) .
Show/hide table
 | |
| Illustration 5 | g01345654 |
- Remove bolt (11) and piston (12) .
Show/hide table
 | |
| Illustration 6 | g01345658 |
- Remove seal (13) and ring (14) .
Show/hide table
 | |
| Illustration 7 | g01345661 |
- Remove pin (15). Remove seal (16) and seal (17) .
Show/hide table
 | |
| Illustration 8 | g01345667 |
Show/hide table
 | |
| Illustration 9 | g01345668 |
Caterpillar Information System:
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Data Link - Test
16M Series 3 and 18M Series 3 Motor Graders Fuel Tank Water and Sediment - Drain
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold
C27 and C32 Engines for Caterpillar Built Machines Piston and Rings
2012/08/08 A New Air Conditioner Relay is Now Available for Certain R1300G Load Haul Dump Machines {7320}
2012/08/08 A New Air Conditioner Relay is Now Available for Certain Load Haul Dump Machines {7320}
R1600H Load Haul Dump Power Train System Schematic
12M Motor Grader Machine Systems Centershift Lock - Remove and Install
12M Motor Grader Machine Systems Centershift Lock Bar and Bushings - Install
12M Motor Grader Machine Systems Centershift Lock Bar and Bushings - Remove
MH3049 Material Handler Hydraulic System Main Control Valve Air - Purge
559C, 579C, 2384C, and 2484C Knuckleboom Loaders TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 559C, 579C, 2384C, and 2484C Knuckleboom Loaders TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
12M Motor Grader Machine Systems Centershift Lock - Assemble
12M Motor Grader Machine Systems Blade Lift Arm - Remove
12M Motor Grader Machine Systems Blade Lift Arm - Install
12M Motor Grader Machine Systems Articulation Cylinder - Remove and Install - Left Side
Cat® Compaction Control for Vibratory Asphalt Compactors and Pneumatic Compactors General Information
C27 and C32 Engines for Caterpillar Built Machines Camshaft
CP54B and CS54B Vibratory Soil Compactors Machine Electronic Control System Machine Preparation for Troubleshooting
C27 and C32 Engines for Caterpillar Built Machines Gear Group (Rear)
Cat® Compaction Control for Vibratory Asphalt Compactors and Pneumatic Compactors Display Description
312F, 313F, 316F and 318F Excavators Wiring Harness (Short Circuit) - Test
C175-16 and C175-20 Engines for Caterpillar Built Machines Turbocharger - Remove - High Altitude
559C and 579C Knuckleboom Loaders Visual Inspection