C3.4B Engines Caterpillar


Cylinder Is Noisy

Usage:

CD-44B 398

可能原因

  • 诊断代码

  • 燃油质量

  • 配气机构部件

  • 喷油器

  • 活塞

建议的措施

注: 下面以概率的先后顺序列出了这些步骤。 依次完成这些步骤。

表 1
故障诊断与排除测试步骤     数值     结果    

1. 诊断代码

A. 建立电子维修工具和电子控制模块 (ECM) 之间的通信。

B. 检查有无现行诊断代码。
   

代码
   

结果:激活或记录了故障诊断代码。

对激活或记录的代码进行故障诊断与排除。 请参阅故障诊断与排除, "故障诊断代码"。

结果:未激活或记录故障诊断代码。

转至测试步骤 2。
   

2. 燃油质量

A. 检查燃油质量。 请参阅系统操作、测试和调整, "燃油质量 - 测试"。

B. 参考操作和保养手册,以了解适用于发动机的恰当的燃油特性的信息。
   

燃油
   

结果:燃油质量不良。

排空燃油系统并更换燃油滤清器。 请参阅操作和保养手册, "燃油系统粗滤器(油水分离器)滤芯 - 更换"和操作和保养手册, "燃油系统滤清器 - 更换"。

向燃油系统中加注符合操作和保养手册, "油液建议"中的标准的燃油。

充注燃油系统。 参考操作和保养手册, "燃油系统 - 充注"。

确认该步骤消除了噪音。

结果:燃油质量正常。

转至测试步骤 3。
   

3. 配气机构部件

A. 检查气门间隙。 请参阅故障诊断与排除, "气门间隙过大"。

B. 检查配气机构部件有无损坏。 从可疑气缸上拆下气门室盖。 检查以下部件有无损坏:

· 气门弹簧

· 摇臂轴

· 推杆

· 凸轮轴随动件

有关更多信息,参考拆解和组装。
   

配气机构
   

结果:配气机构部件损坏。

进行必要修理,并确认通过修理消除了噪音。

结果:配气机构部件未损坏。

继续测试步骤 4。
   

4. 电子单体喷油器

A. 使用电子维修工具检查有无与电子单体喷油器相关的激活的诊断代码。 在继续进行此步骤之前,诊断并排除所有激活的诊断代码。
   

诊断代码
   

结果:喷油器有一个激活的诊断代码。

对所有激活的喷油器诊断代码进行故障诊断与排除。 请参阅故障诊断与排除, "故障诊断代码"。


结果:没有激活的喷油器诊断代码。

继续测试步骤 5。
   

5. 活塞

A. 检查活塞有无损坏和磨损。
   

活塞
   

结果:至少一个活塞磨损或损坏。

更换全部磨损或损坏的零件。

确认修理后消除噪音。

结果:所有活塞正常。

请联系代理商解决方案网络 (DSN)。
   

Caterpillar Information System:

C3.4B Engines Coolant Temperature Is High
2010/10/20 A New Camshaft Thrust Washer and Plate Are Used in C175 Machine Engines {1210, 1210}
C3.4B Engines Coolant Contains Oil
CB44B and CB54B Vibratory Asphalt Compactors Additional Messages
C3.4B Engines Battery Problem
C3.4B Engines Alternator Problem - Charging Problem and/or Noisy Operation
C6.6 Industrial Engine Flywheel Housing - Flywheel Housing that is Equipped with Rear Power Take-Off
C4.4 Industrial Engine Fuel Filter Base - Primary Fuel Filter Base
CB44B and CB54B Vibratory Asphalt Compactors Safety Messages
CAESultra Current Elevation As-Built Surface
CAESultra General Information (Troubleshooting)
CAESultra Window Configuration File
CB44B and CB54B Vibratory Asphalt Compactors Mirror
2010/10/06 Correction to Troubleshooting , "Required Tools" {1808}
814K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Assemble
784C and 785C Off-Highway Truck/Tractors Belts - Inspect/Adjust/Replace
777G Off-Highway Truck Hydraulic and Braking System Service and Parking Brake (Front) - Standard
C9.3 Tier 4 Final Engines Electric Starting Motor
The Auxiliary Hydraulic Pressure Release Switch May Malfunction{5057} The Auxiliary Hydraulic Pressure Release Switch May Malfunction{5057}
New Installation Procedure for Inlet Screen and Outlet Screen of the Electric Retarder Group for 795F Series AC Off-Highway Truck/Tractor{425R} New Installation Procedure for Inlet Screen and Outlet Screen of the Electric Retarder Group for 795F Series AC Off-Highway Truck/Tractor{425R}
770G and 772G Off-Highway Truck Systems Speed Sensor (Transmission Intermediate)
2010/10/19 A New Ride Control Accumulator is Now Available for R1700G and R2900G Load Haul Dump Machines {5077}
2010/10/19 A New Brake Accumulator is Now Available for R2900 and R2900G Load Haul Dump Machines, and AD45 Underground Articulated Trucks {4263}
2010/10/19 A New Ride Control Accumulator is Now Available for R1600 Load Haul Dump Machines {5077}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.