777E and 777F Off-Highway Truck Power Train Caterpillar


Relief Valve (Transmission Lubrication)

Usage:

777F JRP


Illustration 1g00646729
(1) Transmission lubrication relief valve
(2) Spool
(3) Spring
(4) Ports to the transmission case
(5) Passage from the transmission hydraulic control

The transmission lubrication relief valve (1) is located after the relief valve for the transmission hydraulic control. Transmission lubrication relief valve (1) controls the maximum pressure of the lubrication oil that is flowing to the transmission. Lubrication oil for the transmission comes from oil that is flowing through the pressure relief valve for the transmission charging system. When the oil from the transmission charging section of the transmission gear pump reaches the relief setting, oil will pass through the pressure relief valve for the transmission charging system. This oil is then supplied to the transmission as lubricating oil. If the pressure of the lubrication oil in the transmission lubrication relief valve (1) overcomes the force of spring (3), spool (2) will shift. This will allow passage (5) to drain lubrication oil through ports (4) into the transmission case.

Caterpillar Information System:

M325D L MH and M325D MH Material Handlers Hydraulic System Flow (Medium Pressure/Cab Riser Function) - Adjust
Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095} Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095}
2006/05/22 A New Storage Position for the Mud Guards Is Available when the Machine Is Transported {4220}
C4.4 Industrial Engine Electronic Control System
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Brake Pads - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Cylinder (Hood Tilt) - Remove and Install
AQUILATM AQMStudio Map File
AQUILATM AQMStudio Installation
AQUILATM AQMStudio General Information
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
AQUILATM AQMStudio Configuration
773F and 775F Off-Highway Truck Power Train Differential and Bevel Gear
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0296 - FMI 14
120M and 12M Motor Graders Hydraulic System Oil - Change
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2153 - FMI 03
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2153 - FMI 04
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0357 - FMI 05
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0357 - FMI 06
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0357 - FMI 13
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0358 - FMI 03
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0358 - FMI 05
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0358 - FMI 06
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0490 - FMI 03
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.