Installation
Hardware and software requirements
AQMStudio requires one of the following operating environments for the hardware:
- Windows 98®
- Windows ME®
- Windows NT®
- Windows 2000®
- Windows XP®
AQMStudio requires a maximum of twenty (20) Megabytes of free space for the installation.
Software requirements for installation
AQMStudio does not require any other software to be installed.
Installation procedure
Refer to Step 1 through Step 3 in order to perform a successful installation.
- Run the Install AQMStudio0.01.exe file that is in the package for setup. Refer to Illustration 1.
Show/hide table
 | |
| Illustration 1 | g01266522 |
- Choose the file directory in order to install AQMStudio. Then click on the "Install" button. Refer to illustration 2.
Show/hide table
 | |
| Illustration 2 | g01266495 |
- Click "Close" after AQMStudio finishes installing. Refer to illustration 3.
Show/hide table
 | |
| Illustration 3 | g01266498 |
Caterpillar Information System:
AQUILATM AQMStudio General Information
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Transmission Hydraulic Control
AQUILATM AQMStudio Configuration
773F and 775F Off-Highway Truck Power Train Differential and Bevel Gear
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Pressure Switch (Power Train Oil Filter Bypass)
568 GF and 568 LL Forest Machine Window Washer Reservoir - Fill
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System Power Supply Circuit of Electronic Control Module
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System Switch Circuits
Connecting Rod Bearings{1218, 1219} Connecting Rod Bearings{1218, 1219}
992G Wheel Loader and 854G Wheel Dozer Power Train Speed Sensor (Transmission Output)
C27 and C32 Engines for Caterpillar Built Machines Camshaft - Install - C27
773E and 773F Off-Highway Truck and 775E and 775F Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
AQUILATM AQMStudio Map File
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Cylinder (Hood Tilt) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Brake Pads - Remove and Install
C4.4 Industrial Engine Electronic Control System
2006/05/22 A New Storage Position for the Mud Guards Is Available when the Machine Is Transported {4220}
Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095} Potential Vibratory Pump Failures on CP-533E and CS-533E Vibratory Soil Compactors{5050, 5095}
M325D L MH and M325D MH Material Handlers Hydraulic System Flow (Medium Pressure/Cab Riser Function) - Adjust
777E and 777F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0296 - FMI 14
120M and 12M Motor Graders Hydraulic System Oil - Change
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2153 - FMI 03
938H and IT38H Wheel Loader and Integrated Tool Carrier Power Train Speed Sensor (Torque Converter Output) (Transmission Output)