Bearing Surface (Journal) For Connecting Rods
Usage:
(A) Measurement ... 6.045 mm (.2380 in)
(B) Measurement ... 6.045 mm (.2380 in)
(1) Diameter of the connecting rod journals (new) ... 76.180 ± 0.020 mm (2.9992 ± .0008 in)
Difference in diameter at (A) and (B) must not be more than ... 0.015 mm (.0006 in)
(2) Radius ... 4.74 ± 0.20 mm (.187 ± .008 in)
NOTE: Radius must blend smoothly (have no sharp edges) with the machined surfaces of the journals.
(3) Width of journals ... 47.668 ± 0.140 mm (1.877 ± .006 in)
Caterpillar Information System:
3306B GENERATOR SET ENGINE Bearing Surface (Journal) For Main Bearings
3306B GENERATOR SET ENGINE Crankshaft
3306B GENERATOR SET ENGINE Pistons And Rings
3306B GENERATOR SET ENGINE Connecting Rod
3306B GENERATOR SET ENGINE Cylinder Liner
3306B GENERATOR SET ENGINE Camshaft Bearings
3306B GENERATOR SET ENGINE Cylinder Block
3306B GENERATOR SET ENGINE Water Temperature Regulator
3306B GENERATOR SET ENGINE Belt Tension Chart
3306B GENERATOR SET ENGINE Water Pump
3306B GENERATOR SET ENGINE Engine Oil Pressure
3306B GENERATOR SET ENGINE Oil Breather Cap
3306B GENERATOR SET ENGINE Connecting Rod and Main Bearings
3306B GENERATOR SET ENGINE Timing Gear Cover
3306B GENERATOR SET ENGINE Engine Front Support
3306B GENERATOR SET ENGINE Flywheel
3306B GENERATOR SET ENGINE Flywheel Housing
3306B GENERATOR SET ENGINE Systems Operation
3306B GENERATOR SET ENGINE Testing & Adjusting
G3306B GENERATOR SET ENGINE Battery Charger
G3306B GENERATOR SET ENGINE Control Panel Enclosure
G3306B GENERATOR SET ENGINE Control Panels
G3306B GENERATOR SET ENGINE Electric Starting Motor
G3306B GENERATOR SET ENGINE Fuel Injection Lines