Cylinder Liner
Usage:
NOTE: Make reference to Guideline for Reusable Parts; Pistons and Cylinder Liners, SEBF8049 and SEBF8068.
(1) Bore in liner (new) ... 120.675 ± 0.025 mm (4.7509 ± .0010 in)
Use again maximum bore when measured near upper end of the wear surface of the cylinder liner ... 120.78 mm (4.755 in)
(2) Thickness of flange on liner ... 10.282 ± 0.020 mm (.4048 ± .0008 in)
(3) Filler band.
Cylinder Liner Installation
Put liquid soap on bottom liner bore in block, on grooves in lower liner, and on O-rings. Install O-rings on liner. Put filler band (3) in engine oil for a moment and install on liner. Immediately install liner in cylinder block (before expansion of filler band).
Caterpillar Information System:
3306B GENERATOR SET ENGINE Camshaft Bearings
3306B GENERATOR SET ENGINE Cylinder Block
3306B GENERATOR SET ENGINE Water Temperature Regulator
3306B GENERATOR SET ENGINE Belt Tension Chart
3306B GENERATOR SET ENGINE Water Pump
3306B GENERATOR SET ENGINE Engine Oil Pressure
3306B GENERATOR SET ENGINE Oil Breather Cap
3306B GENERATOR SET ENGINE Oil Filter
3306B GENERATOR SET ENGINE Oil Pump
3306B GENERATOR SET ENGINE Turbochargers
3306B GENERATOR SET ENGINE Exhaust Manifold
3306B GENERATOR SET ENGINE Valve Cover
3306B GENERATOR SET ENGINE Connecting Rod
3306B GENERATOR SET ENGINE Pistons And Rings
3306B GENERATOR SET ENGINE Crankshaft
3306B GENERATOR SET ENGINE Bearing Surface (Journal) For Main Bearings
3306B GENERATOR SET ENGINE Bearing Surface (Journal) For Connecting Rods
3306B GENERATOR SET ENGINE Connecting Rod and Main Bearings
3306B GENERATOR SET ENGINE Timing Gear Cover
3306B GENERATOR SET ENGINE Engine Front Support
3306B GENERATOR SET ENGINE Flywheel
3306B GENERATOR SET ENGINE Flywheel Housing
3306B GENERATOR SET ENGINE Systems Operation
3306B GENERATOR SET ENGINE Testing & Adjusting