Air Cleaner
Usage:
Remove Air Cleaner
1. Loosen nut (1) and remove cover (2).
2. Remove nut (4) and lift air cleaner element (5) out of housing.
3. Remove bolts (3) to remove air cleaner housing (6).
Install Air Cleaner
1. Put air cleaner housing in position on air inlet manifold and install the bolts that hold it.
2. Install air cleaner element in housing. Install and tighten the nut that holds it.
3. Install cover and tighten nut.
Caterpillar Information System:
3208 TRUCK ENGINE General Instructions
3208 TRUCK ENGINE Engine Vibration Troubleshooting
3208 TRUCK ENGINE Fuel In Crankcase Oil
3208 TRUCK ENGINE Loss Of Coolant
3208 TRUCK ENGINE Cooling System
3208 TRUCK ENGINE Difficult Starting
3208 TRUCK ENGINE Too Much Exhaust Smoke
3208 TRUCK ENGINE Misfiring And Running Rough
3208 TRUCK ENGINE Problem With Vehicle Or Vehicle Operation
3208 TRUCK ENGINE High Fuel Consumption Troubleshooting
3208 TRUCK ENGINE Primary Engine Test For High Fuel Consumption
3208 TRUCK ENGINE Low Power Troubleshooting - (Diagnosing with Chassis Dynamometer)
3208 TRUCK ENGINE Fuel Injection Lines
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE Check Valve And Bypass Valve
3208 TRUCK ENGINE Shutoff Housing
3208 TRUCK ENGINE Fuel Injection Pumps
3208 TRUCK ENGINE Fuel Transfer Pump
3208 TRUCK ENGINE Fuel Injection Pump Housing And Governor
3208 TRUCK ENGINE Governor
3208 TRUCK ENGINE Fuel Injection Pump Housing
3208 TRUCK ENGINE Fuel Injection Pump Housing (With Thrust Washer)
3208 TRUCK ENGINE Exhaust Manifold