Engine Oil Filter Base - Remove - Remote Mount
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove the engine oil filters. Refer to Operation and Maintenance Manual, Engine Oil and Filter - Change.
Show/hide table
Illustration 1 g06318483 - Disconnect tube assemblies (1) and (2).
Show/hide table
Illustration 2 g06318517 - Remove bolts (3) and engine oil filter base (4).
Caterpillar Information System:
320D3 Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
PM820, PM822, and PM825 Cold Planer Conveyor Belt Tension and Tracking - Adjust
320D3 Hydraulic Excavator Machine Systems Pump Drive Coupling - Remove and Install
C18 Generator set and C18 Marine Engines Fuel Manifold - Install
C175-16 Marine Engines Oil Mist Detector - Clean
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankshaft Front Seal - Remove and Install
320D3 Hydraulic Excavator Machine Systems Monitor - Remove and Install - Machine
C18 Generator set and C18 Marine Engines Fuel Manifold - Remove
320D3 and 323D3 Excavators Systems Pump Control (Main Hydraulic) - Main Pump Regulator
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Boom/Stick/Bucket Combinations
The Brake Cooling and Brake Charging Pump May Lose Efficiency Prematurely on Certain 777G Off-Highway Trucks {5073} The Brake Cooling and Brake Charging Pump May Lose Efficiency Prematurely on Certain 777G Off-Highway Trucks {5073}
797F Tier 4 Off-Highway Truck Engine Supplement Nitrogen Oxide Sensor (Exhaust Inlet) - Remove and Install
797F Tier 4 Off-Highway Truck Engine Supplement Temperature Sensor (Exhaust Inlet) - Remove and Install
New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400} New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400}
Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269} Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403}
A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274} A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274}
320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Remote Mount
320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Install
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490} Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620} New Brake Software is Now Available For Certain 794 AC and 795F AC Large Off-Highway Trucks {7490, 7610, 7620}
797F Tier 4 Off-Highway Truck Engine Supplement Pressure Sensor (Exhaust Inlet) - Remove and Install