A New Turbine Inlet Bellows is Available for 3512 Locomotive Engines {1059}
- Engine
- 3512C (S/N: NJT1-234)
Description Of Change: The new turbine inlet casting, bellows, and clamps with improved 3/4 and 1/2 marman joints are more robust.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Table 1 contains the part number for the new parts.
Show/hide table
| Qty | New Part Number | Part Number Description |
|---|---|---|
| 32 | Washer | |
| 2 | Bellows As | |
| 16 | Full Nut | |
| 2 | Gasket | |
| 4 | Gasket | |
| 4 | Band Clamp | |
| 2 | Bellows As | |
| 2 | Exhaust Gasket | |
| 2 | Spacer | |
| 1 | Exhaust Manifold | |
| 1 | Exhaust Manifold | |
| 1 | Shield As | |
| 1 | Shield As | |
| 1 | Shield As | |
| 1 | Shield As | |
| 8 | Hard Washer | |
| 16 | High Temperature Bolt | |
| 8 | High Temperature Bolt |
Caterpillar Information System:
C175-16 Oil and Gas Generator Set Model View Illustrations
G3512 Generator Set Engines Prelubrication Pump Problem
C4.4 and C6.6 Engines Valve Position - Test
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
C4.4 and C6.6 Engines Switch Circuits - Test - Air Filter Restriction Switch
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000} Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
C175-16 Oil and Gas Generator Set After Stopping Engine
C175 Tier 4 Final Engines for Off-Highway Trucks Sensor Supply - Test
C4.4 and C6.6 Engines Speed/Timing - Test
C4.4 and C6.6 Engines Speed Control (PWM) - Test
C4.4 and C6.6 Engines Speed Control (Analog) - Test
C4.4 and C6.6 Engines Soot Sensor - Test
Relay Compatibility Issue on Continuous Oil Prelube on 3508 Fire Pump Engines {1319} Relay Compatibility Issue on Continuous Oil Prelube on 3508 Fire Pump Engines {1319}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Front Steering) - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Exhaust Temperature Is High
Fuel Line Serviceability for Certain Tier 4 C175 Engines {1100, 1101, 1252} Fuel Line Serviceability for Certain Tier 4 C175 Engines {1100, 1101, 1252}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Exhaust Has Excessive White Smoke
C175 Tier 4 Final Engines for Off-Highway Trucks Solenoid Valve - Test - Aftertreatment
C175 Tier 4 Final Engines for Off-Highway Trucks Solenoid Valve - Test - Engine
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Steering) - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Diagnostic Trouble Codes
C175 Tier 4 Final Engines for Off-Highway Trucks Event Codes
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing) - Remove and Install
C7.1 Marine Engine Water Temperature Regulator - Remove and Install