EMCPll+ Software Not Compatible With Certain G3400 Engines{4490}
- Engine:
- G3408C (S/N: BAZ2580-2648)
Introduction
The problem that is identified below does not have a known solution. Until a permanent solution is known, use the solution that is identified below.
Problem
While the engine is running with an EMCPll+ (194-0807_02), the fault alarm indicator will be active generating code "AL 14 Phase A No Voltage Input Fault".
Without a generator to produce voltage, the alarm will be triggered and the display function cannot be turned off in the display panel.
Solution
Install an inverter with a range of 24VAC to 110VAC inside the panel. The inverter will supply the needed voltage to eliminate the code stated previously.
EMCPll+ (194-0807_02) has been removed from the Petroleum price list.
Caterpillar Information System:
C9.3 Industrial Engine Plate Locations and Film Locations
C13 Generator Set Engine Fan Drive - Remove and Install
3516C Locomotive Engines Selective Catalytic Reduction Component Location
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Engine Overspeeds
C3.4B Industrial Engine After Starting Engine
C13 Generator Set Engine Fan Guard - Remove and Install
C13, C15, and C18 Generator Set Engines Turbocharger Oil Lines
C13, C15, and C18 Tier 4 Final Engines Cover Group (Front Housing)
3516C Locomotive Engines Selective Catalytic Reduction System Overview
2013/10/03 A New Oil Pressure Control Valve Group Is Used on Certain C175 Engines {1304, 5117}
3516C Locomotive Engines Selective Catalytic Reduction Dosing Control System Operation
374F Excavator Hydraulic System Stick Drift Reduction Valve
C9.3 Industrial Engine Product Lifting
C13 Generator Set Engine Fan Drive - Disassemble
C13 Generator Set Engine Fan Drive - Assemble
C7.1 Engines Fuel Pressure Sensor - Remove and Install
371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703} 371-0351 Hydraulic Valve Seat Puller Group {0374, 0599, 0700, 0703}
C27 and C32 Generator Sets Product Description
2015/08/19 An Improved Seat Belt Group is Now Available for 311 through 390 Excavators {7327}
2013/07/30 New Service Replacement Stator Part Numbers for Certain XQ60, XQ100, and XQ175 Generator Sets are Now Available {4453}
3516C Marine Engines Water Lines
C3.4B Industrial Engine Fuel Related Components in Cold Weather
C13 Generator Set Engine Fan - Remove and Install
3516C Marine Engines Engine Oil Lines