Engine Speed/Timing Sensor
Show/hide table
图 1 | g03357598 |
Show/hide table
265-9033 速度传感器总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 1     | 265-9033 转速传感器总成 (发动机正时)     | 拧紧至扭矩为 40 ± 5 N·m (30 ± 4 lb ft)。     |
工作电压为 7.5 至 14.0 VDC。 | |||
输出频率为 9 Hz 至 10 kHz。 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
C15 Engines for Combat and Tactical Vehicles Air Inlet and Exhaust System
CG137-08 and CG137-12 Engines Flywheel Housing - Remove and Install
C4.4 Marine Generator Set Engine Operation
CG137-08 and CG137-12 Engines Flywheel - Remove and Install
CG137-08 and CG137-12 Engines Vibration Damper and Pulley - Remove and Install
CG137-08 and CG137-12 Generator Sets Valve Cover
C280 Marine Engines Nitrogen Oxide Sensor (Exhaust Pipe Out)
C280 Marine Engines Nitrogen Oxide Sensor (Engine Exhaust Out)
3516C Generator Set Engines Nozzle (DEF)
3516C Generator Set Engines Temperature Sensor (Exhaust)
C9.3 Tier 4 Final Engines Inlet Air Temperature Sensor
G3516 Engines Engine Speed Sensor
CG137-08 and CG137-12 Generator Sets Stub Shaft (Rear)
CG137-08 and CG137-12 Generator Sets Flywheel
C9.3 Tier 4 Final Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Pressure Sensor (Exhaust Differential)
3516C Generator Set Engines Catalytic Converter Sensor
C13, C15, and C18 Tier 4 Final Engines Front Housing and Covers
3516C Generator Sets Glossary
3516C Generator Sets Engine Crankcase Breather - Clean
C15 Engines for Combat and Tactical Vehicles Lubrication System
C4.4 Marine Generator Set Before Starting Engine
CG137-08 and CG137-12 Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install