C280 Marine Engines Caterpillar


Nitrogen Oxide Sensor (Engine Exhaust Out)

Usage:

C280-08 J4R


Illustration 1g02695677

Table 1
Specification for 359-9171 Nitrogen Oxide Sensor As 
Item  Qty  Part  Specification Description 
359-9171 Nitrogen Oxide Sensor As  Torque to 50 ± 10 N·m (37 ± 7 lb ft)
Operating voltage is 16 to 36 V.

Caterpillar Information System:

3516C Generator Set Engines Nozzle (DEF)
3516C Generator Set Engines Temperature Sensor (Exhaust)
C9.3 Tier 4 Final Engines Inlet Air Temperature Sensor
C9.3 Engines for Caterpillar Built Machines Boost Pressure Sensor
C9.3 Tier 4 Final Engines Engine Oil Pressure Sensor
C9.3 Engines for Caterpillar Built Machines Fuel Pressure Sensor
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453} Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
C15 Engines for Combat and Tactical Vehicles Electronic Control System Components
CG137-08 and CG137-12 Engines Engine Oil Pan - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Engine Oil Filter Base - Remove and Install - G3412B
2011/09/23 A New Exhaust Cross-Over Bellows Is Used On Certain 3508B and 3508C Engines {1059}
C175-16 Engine for Off-Highway Trucks Temperature Sensor (DEF Cabinet Air)
C280 Marine Engines Nitrogen Oxide Sensor (Exhaust Pipe Out)
CG137-08 and CG137-12 Generator Sets Valve Cover
CG137-08 and CG137-12 Engines Vibration Damper and Pulley - Remove and Install
CG137-08 and CG137-12 Engines Flywheel - Remove and Install
C4.4 Marine Generator Set Engine Operation
CG137-08 and CG137-12 Engines Flywheel Housing - Remove and Install
C15 Engines for Combat and Tactical Vehicles Air Inlet and Exhaust System
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
G3516 Engines Engine Speed/Timing Sensor
G3516 Engines Engine Speed Sensor
CG137-08 and CG137-12 Generator Sets Stub Shaft (Rear)
CG137-08 and CG137-12 Generator Sets Flywheel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.