Air Compressor Drive Gear - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 132-5451     | Holding Fixture     | 1     |
- Install air compressor drive gear (1) on the air compressor.
Show/hide table
Illustration 1 | g01128545 |
Note: Caterpillar may use air compressors that have a tapered shaft or a straight shaft. The torque for the nut on the air compressor crankshaft is different for each type of crankshaft. Identify the manufacturer of the air compressor for your particular application.
- Install Tooling (A) on air compressor drive gear (1) .
- Install nut (2) .
- Refer to Specifications, "Air Compressor Drive Gear - Install" for the correct torque for the nut (2) .
- Remove Tooling (A) .
End By: Install the air compressor. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Caterpillar Information System:
C7 Engine for Combat and Tactical Vehicles Air Compressor Drive Gear - Remove
C7 Engine for Combat and Tactical Vehicles Air Compressor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Electric Starting Motor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Alternator - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Control Module - Remove and Install
C7 Engine for Combat and Tactical Vehicles Fan Drive Mounting Group - Remove and Install
C7 Engine for Combat and Tactical Vehicles Inlet Air Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Boost Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Speed/Timing Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Injection Actuation Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Oil Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Coolant Temperature Sensor - Remove and Install
C175 Generator Sets System Pressure Release
C15 and C18 Industrial Engines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C13, C15, and C18 Tier 4 Interim Engines ECM - Replace
2009/04/27 Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
C7.1 Industrial Engine Electrical System
C15 and C18 Industrial Engines Pressure Sensor (DPF) - Remove and Install
Adjustment of Overload Protection for Generators{4450, 4493} Adjustment of Overload Protection for Generators{4450, 4493}
3500B and 3500C Marine Engines Alternator and Regulator
C13, C15, and C18 Generator Set Engines Belt Tightener
120 and 120 AWD Motor Grader Ether Starting Aid Cylinder - Replace
C9.3 Engines for Caterpillar Built Machines Customer Passwords
795F AC and 795F AC XQ Off-Highway Trucks Air Filter Element (Inverter Cabinet) - Check