Injection Actuation Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
 | |
| Illustration 1 | g01128104 |
(1) Injection actuation pressure sensor ... 20 ± 2 N·m (15 ± 1.5 lb ft)
Caterpillar Information System:
C7 Engine for Combat and Tactical Vehicles Engine Oil Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Coolant Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Atmospheric Pressure Sensor - Remove and Install
C9 Marine Auxiliary and Generator Set Engines Emissions Certification Film
C7 Engine for Combat and Tactical Vehicles Bearing Clearance - Check
C7 Engine for Combat and Tactical Vehicles Crankshaft Gear - Remove and Install
C7 Engine for Combat and Tactical Vehicles Crankshaft - Install
C7 Engine for Combat and Tactical Vehicles Crankshaft - Remove
C7 Engine for Combat and Tactical Vehicles Crankshaft Main Bearings - Install
C7 Engine for Combat and Tactical Vehicles Crankshaft Main Bearings - Remove
C7 Engine for Combat and Tactical Vehicles Connecting Rod Bearings - Install
C7 Engine for Combat and Tactical Vehicles Connecting Rod Bearings - Remove
C7 Engine for Combat and Tactical Vehicles Speed/Timing Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Boost Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Inlet Air Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Fan Drive Mounting Group - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Control Module - Remove and Install
C7 Engine for Combat and Tactical Vehicles Alternator - Remove and Install
C7 Engine for Combat and Tactical Vehicles Electric Starting Motor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Air Compressor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Air Compressor Drive Gear - Remove
C7 Engine for Combat and Tactical Vehicles Air Compressor Drive Gear - Install
C175 Generator Sets System Pressure Release
C15 and C18 Industrial Engines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module