Engine Speed/Timing Sensor - Clean/Inspect
Show/hide table
| |
| Illustration 1 | g01863196 |
|
View of the front of a typical C12 Marine Engine (1) Speed/timing sensor (camshaft) (2) Speed/timing sensor (crankshaft) | |
- Remove the speed/timing sensors.
- Inspect the condition of the plastic end of the speed/timing sensors for wear and/or contaminants.
- Clean the metal shavings and other debris from the face of the speed/timing sensors.
- Install the speed/timing sensors. Ensure that the sensor is seated before the bolt is tightened. Tighten each bolt to a torque of
28 ± 7 N·m (21 ± 5 lb ft) .
Caterpillar Information System:
2009/05/11 A New Wiring Harness for the Space Heater Is Used {1408, 664E}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Magnetic Switch
C12 Marine Engines Fuel Injector - Inspect/Adjust
C11 and C13 Engines Fuel Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Crankshaft
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C4.4 Industrial Engine Fuel Injection Nozzles
C7.1 Engines for Caterpillar Built Machines Glow Plugs
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
C6.6 Industrial Engine Valve Mechanism Cover
C6.6 Industrial Engine Crankcase Breather
C15 and C18 Industrial Engines Inlet Air Temperature Sensor - Remove and Install
C12 Marine Engines Emissions Certification Film
C6.6 Industrial Engine Exhaust Cooler (NRS)
2009/04/06 Improved Water Pump {1361}
C32 Marine Engine Coolant Contains Oil
C13 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Coolant Level Is Low
C13, C15, and C18 Tier 4 Interim Engines Coolant Temperature Is High
C13 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Front Cover - Remove and Install
793F and 797F Off-Highway Trucks Power Train Electronic Control System Electronic Control Module (ECM) - Configure
C9.3 Tier 4 Interim Engines Coolant Temperature Is Low