Magnetic Switch
Show/hide table
Illustration 1 | g02832277 |
Show/hide table
Specification for 241-8368 Magnetic Switch Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 2 | 4F-2294 Jam Nut | Torque to |
- | - | - | Operating temperature is |
- | - | - | Operating voltage is 24 VDC. |
- | - | - | Contact position is normally open. |
- | - | - | Maximum pull-in voltage at |
- | - | - | Maximum hold-in voltage at |
- | - | - | Coil resistance at |
- | - | - | Maximum current draw at |
Caterpillar Information System:
C12 Marine Engines Fuel Injector - Inspect/Adjust
C11 and C13 Engines Fuel Pressure Sensor
C7.1 Engines for Caterpillar Built Machines Crankshaft
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C4.4 Industrial Engine Fuel Injection Nozzles
C7.1 Engines for Caterpillar Built Machines Glow Plugs
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
C6.6 Industrial Engine Valve Mechanism Cover
C6.6 Industrial Engine Crankcase Breather
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
C6.6 Industrial Engine Electronic Control Module
2009/05/11 A New Wiring Harness for the Space Heater Is Used {1408, 664E}
C12 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
C15 and C18 Industrial Engines Inlet Air Temperature Sensor - Remove and Install
C12 Marine Engines Emissions Certification Film
C6.6 Industrial Engine Exhaust Cooler (NRS)
2009/04/06 Improved Water Pump {1361}
C32 Marine Engine Coolant Contains Oil
C13 Engines for Caterpillar Built Machines Turbocharger - Remove and Install
C13, C15, and C18 Tier 4 Interim Engines Coolant Level Is Low
C13, C15, and C18 Tier 4 Interim Engines Coolant Temperature Is High
C13 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Front Cover - Remove and Install