Air Inlet Manifold - Remove
Removal Procedure
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Loosen the hose clamp and disconnect air intake hose (1) .
Show/hide table
Illustration 1 | g00886878 |
- Remove 8 bolts (2) and remove air intake manifold (3).
Show/hide table
Illustration 2 | g00886881 |
Caterpillar Information System:
322C and 325C Forest Machines Hydraulic System Travel Hydraulic System
304 CR Mini Hydraulic Excavator Hydraulic System Swing Boom Hydraulic System
2007/08/20 C-12/3176C/3196 Front Housing Bolts {1151}
330C Excavator Work Tool Control
325C Excavator Joystick Controls
325C Excavator Cab Tilt Control - If Equipped
302.5 Mini Hydraulic Excavator Circuit Breakers - Reset
330C Excavator Machine Systems Boom Cylinder - Remove
302.5 Mini Hydraulic Excavator Track Adjustment - Adjust
304 CR Mini Hydraulic Excavator Hydraulic System Boom Hydraulic System
304 CR Mini Hydraulic Excavator Access Door and Cover Locations
5230 Excavator Hydraulic System Swing Parking Brake
318C Excavator Tool Control System Controller
3306C Engines for Caterpillar Built Machines Alternator and Regulator
303.5 Mini Hydraulic Excavator Lubricant Viscosities
307C Excavator Engine Supplement Air Inlet Manifold - Install
307C Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
304 CR Mini Hydraulic Excavator Machine System Specifications Main Hydraulic Pump
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Cab Mounting
385B Excavator Demolition Operation (Ultrahigh)
5130B Excavator Hydraulic System Control Valve (Cooler Shutoff)
322C and 325C Forest Machines Hydraulic System Return Hydraulic System
5230 Excavator Hydraulic System Pilot Hydraulic System
325D and 329D Excavators Joystick Controls - Medium Pressure (If Equipped)