Air Inlet Manifold - Install
Installation Procedure
Note: Check the gaskets for wear or for damage. Use new gaskets for replacement, if necessary.
- Position air intake manifold (3) and install 8 bolts (2).
Show/hide table
 | |
| Illustration 1 | g00886881 |
- Connect air intake hose (1) and tighten the hose clamp.
Show/hide table
 | |
| Illustration 2 | g00886878 |
Caterpillar Information System:
303.5 Mini Hydraulic Excavator Lubricant Viscosities
3306C Engines for Caterpillar Built Machines Alternator and Regulator
318C Excavator Tool Control System Controller
307C Excavator Engine Supplement Air Inlet Manifold - Remove
322C and 325C Forest Machines Hydraulic System Travel Hydraulic System
304 CR Mini Hydraulic Excavator Hydraulic System Swing Boom Hydraulic System
2007/08/20 C-12/3176C/3196 Front Housing Bolts {1151}
330C Excavator Work Tool Control
325C Excavator Joystick Controls
325C Excavator Cab Tilt Control - If Equipped
302.5 Mini Hydraulic Excavator Circuit Breakers - Reset
330C Excavator Machine Systems Boom Cylinder - Remove
307C Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
304 CR Mini Hydraulic Excavator Machine System Specifications Main Hydraulic Pump
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Cab Mounting
385B Excavator Demolition Operation (Ultrahigh)
5130B Excavator Hydraulic System Control Valve (Cooler Shutoff)
322C and 325C Forest Machines Hydraulic System Return Hydraulic System
5230 Excavator Hydraulic System Pilot Hydraulic System
325D and 329D Excavators Joystick Controls - Medium Pressure (If Equipped)
2002/05/06 Adjustment Procedure for the Bumper for the Cab Door {7308}
Air Conditioning and Heating R-12 All Caterpillar Machines System Capacities for Refrigerant
304 CR Mini Hydraulic Excavator Machine System Specifications Blade Lift Cylinder
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Travel Motor - Disassemble