Electric Starting Motor
Usage:
Remove & Install Starting Motor
NOTE: For purposes of assembly, identify and mark the positions of all wiring before disconnecting or removing any wires.
Show/hide table
Disconnect batteries before performance of any service work. |
1. Disconnect the wires from the starting motor.
Typical Example
2. Fasten a hoist to the starting motor. Remove three bolts (1) that hold the starting motor to flywheel housing. Remove the electric starting motor. The weight of the starting motor is 32 kg (70 lb).
NOTE: The following steps are for installation of the electric starting motor.
3. Fasten a hoist, and install electric starting motor on the flywheel housing. Install the three bolts (1) that hold the starting motor to flywheel housing.
4. Connect the wires to the starting motor.
Caterpillar Information System:
3406E & 3456 INDUSTRIAL ENGINE Injector Sleeves
3406E & 3456 INDUSTRIAL ENGINE Electronic Unit Injectors
3406E & 3456 INDUSTRIAL ENGINE Personality Ratings Module
3406E & 3456 INDUSTRIAL ENGINE Electronic Control Module
3406E & 3456 INDUSTRIAL ENGINE Fuel Manifold
3406E & 3456 INDUSTRIAL ENGINE Fuel Transfer Pump
3406E & 3456 INDUSTRIAL ENGINE Fuel Filter & Base
3406E & 3456 INDUSTRIAL ENGINE Fuel Priming Pump
3406E & 3456 INDUSTRIAL ENGINE Air Compressor
3412E Industrial Engine Electrical System 3412E Industrial Engine Electrical System
3408E & 3412E INDUSTRIAL ENGINES Bearing Clearances
3408E & 3412E INDUSTRIAL ENGINES Spacer Plates
3406E & 3456 INDUSTRIAL ENGINE Turbocharger
3406E & 3456 INDUSTRIAL ENGINE Water Temperature Regulator & Manifold
3406E & 3456 INDUSTRIAL ENGINE Engine Oil Cooler
3406E & 3456 INDUSTRIAL ENGINE Oil Filter & Base
3406E & 3456 INDUSTRIAL ENGINE Oil Filter Base
3406E & 3456 INDUSTRIAL ENGINE Exhaust Manifold
3406E & 3456 INDUSTRIAL ENGINE Water Pump
3406E & 3456 INDUSTRIAL ENGINE Fan Drive Assembly
3406E & 3456 INDUSTRIAL ENGINE Engine Front Support
3406E & 3456 INDUSTRIAL ENGINE Vibration Damper
3406E & 3456 INDUSTRIAL ENGINE Timing Gear Cover
3406E & 3456 INDUSTRIAL ENGINE Timing Gears & Plate