Personality Ratings Module
Usage:
Remove & Install Personality Ratings Module
1. Loosen the Allen screws and disconnect the wiring harnesses from the Electronic Control Module.
2. Remove the four bolts and cover (2) from Electronic Control Module (1). Check the condition of the O-ring seal beneath cover (2). Replace it with a new one if needed. For purposes of reassembly, the torque for the bolts holding cover (2) is 1.36 N·m (12 lb in).
3. Remove personality ratings module (3).
4. Install personality ratings module (3) in the reverse order of removal.
Caterpillar Information System:
3406E & 3456 INDUSTRIAL ENGINE Electronic Control Module
3406E & 3456 INDUSTRIAL ENGINE Fuel Manifold
3406E & 3456 INDUSTRIAL ENGINE Fuel Transfer Pump
3406E & 3456 INDUSTRIAL ENGINE Fuel Filter & Base
3406E & 3456 INDUSTRIAL ENGINE Fuel Priming Pump
3406E & 3456 INDUSTRIAL ENGINE Air Compressor
3412E Industrial Engine Electrical System 3412E Industrial Engine Electrical System
3408E & 3412E INDUSTRIAL ENGINES Bearing Clearances
3408E & 3412E INDUSTRIAL ENGINES Spacer Plates
3408E & 3412E INDUSTRIAL ENGINES Pistons & Connecting Rod Assemblies
3408E & 3412E INDUSTRIAL ENGINES Piston Cooling Jets
3408E & 3412E INDUSTRIAL ENGINES Engine Oil Pump
3406E & 3456 INDUSTRIAL ENGINE Electronic Unit Injectors
3406E & 3456 INDUSTRIAL ENGINE Injector Sleeves
3406E & 3456 INDUSTRIAL ENGINE Electric Starting Motor
3406E & 3456 INDUSTRIAL ENGINE Turbocharger
3406E & 3456 INDUSTRIAL ENGINE Water Temperature Regulator & Manifold
3406E & 3456 INDUSTRIAL ENGINE Engine Oil Cooler
3406E & 3456 INDUSTRIAL ENGINE Oil Filter & Base
3406E & 3456 INDUSTRIAL ENGINE Oil Filter Base
3406E & 3456 INDUSTRIAL ENGINE Exhaust Manifold
3406E & 3456 INDUSTRIAL ENGINE Water Pump
3406E & 3456 INDUSTRIAL ENGINE Fan Drive Assembly
3406E & 3456 INDUSTRIAL ENGINE Engine Front Support