Changing Engine Speed
Show/hide table
Illustration 1 | g00568079 |
Show/hide table
Throttle Control - The throttle control is a two-position switch. Use the switch to control the engine speed (rpm). |
Show/hide table
FAST - In order to increase the engine speed to high idle, push the switch forward to the FAST position. |
Show/hide table
SLOW - In order to decrease the engine speed to low idle, push the switch rearward to the SLOW position. |
Caterpillar Information System:
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Screed Plate Adjustment
797 Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Install
120H Motor Grader Cutting Edges and End Bits - Inspect/Replace
216, 226 and 228 Skid Steer Loaders Engine Supplement Muffler - Remove and Install
725 and 730 Articulated Trucks Fuses - Replace
CS-431C, CP-433C and CS-433C Vibratory Compactors Propel System Wheel and Tire
2006/03/27 The Differential and Bevel Gear Group Has Been Updated {3251, 3258}
140H and 160H Motor Graders Cutting Edges and End Bits - Inspect/Replace
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Oil Level - Check
988G Wheel Loader Power Train Differential and Bevel Gear - Assemble
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Senders
2000/03/20 Corrections to the Power Train Disassembly and Assembly Module, SENR1217, Power Train Disassembly and Assembly Module, SENR5976-01, Power Train Disassembly and Assembly Module, SENR5995-01, Power Train Disassembly and Assembly Module, SENR6706-01, Po
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Related Components
216, 226 and 228 Skid Steer Loaders Engine Supplement Electric Starting Motor - Remove and Install - 228 Skid Steer Loader
16H Motor Grader Cutting Edges and End Bits - Inspect/Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Governor Actuator Control
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Deflector Plate Adjustment
2000/03/06 The End Of Control Cable For Implement Valve Has Serviceable Parts {5051}
2000/03/06 The VIMSpc99 Version 1.1.7 Software Update Is Now Available {7601}
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Solenoid Valves
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoes
16H Motor Grader Drawbar Ball and Socket - Lubricate
D8R Series II Track-Type Tractor Engine Valve Rotators - Inspect