Before Starting
Usage:
Perform required periodic maintenance before starting the engine. Make a "walk-around" inspection of the installation. It only takes a few minutes to correct minor discrepancies. This can prevent major repairs at a later date.
- 1. Inspect the air cleaner service indicator. If the red piston is locked in the raised position, service the air cleaner.
- 2. Inspect the coolant level. The level must be to the bottom of the radiator filler neck.
- 3. Measure the crankcase oil level. The oil level must be between the ADD and FULL marks on the dipstick.
- 4. Disconnect any battery chargers that are not protected against the starter current drain.
Caterpillar Information System:
3408 TRUCK ENGINE Safety
3408 TRUCK ENGINE Model View
3408 TRUCK ENGINE General Information
3408 TRUCK ENGINE Emergency Service (U.S.A. Only)
3408 TRUCK ENGINE Foreword
3306 TRUCK ENGINE Important Reference Numbers
3306 TRUCK ENGINE Emission Related Components Required Maintenance And Warranty Information
3306 TRUCK ENGINE Troubleshooting
3306 TRUCK ENGINE Every 100,000 Miles or 2,500 Service Hours Whichever Occurs First
3306 TRUCK ENGINE Every 50,000 Miles or 1,000 Service Hours Whichever Occurs First
3306 TRUCK ENGINE Every 30,000 Miles or 750 Service Hours Whichever Occurs First
3306 TRUCK ENGINE Every 20,000 Miles or 500 Service Hours Whichever Occurs First
3408 TRUCK ENGINE Starting the Engine
3408 TRUCK ENGINE Operating the Engine
3408 TRUCK ENGINE Stopping the Engine
3408 TRUCK ENGINE BrakeSaver Operation
3408 TRUCK ENGINE Maintenance Recommendations
3408 TRUCK ENGINE Engine Specifications
3408 TRUCK ENGINE Lubricant Specifications
3408 TRUCK ENGINE Fuel Specifications
3408 TRUCK ENGINE Coolant Specifications
3408 TRUCK ENGINE Lubrication and Preventive Maintenance Schedule
3408 TRUCK ENGINE Daily or Every 400 Miles (644 km)
3408 TRUCK ENGINE Every 250 Service Hours or 10,000 Miles (16 000 km)