Usage:
07Dec2015 |
After Failure Only | PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SCRAPER MOUNTS ON CERTAIN CB44B, CB54B, CD44B, AND CD54B ASPHALT COMPACTORS |
|
6607 | PS53089 |
NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53089" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
TERMINATION DATE |
31Dec2017 |
PROBLEM
The existing scraper mounting fasteners can fail on certain CB44B, CB54B, CD44B, and CD54B Asphalt Compactors. If the existing scraper mounting fasteners fail it can result in the scraper no longer performing its intended function. |
AFFECTED PRODUCT
Model | Identification Number |
*******Group 1******* | |
CB54B | LXD00100-00308 RJN00100-00164, 166-228 S4P00100-00232, 234-239, 242, 244-245 |
*******Group 2******* | |
CD54B | GRT00102-00139 J9T00100-00113 |
*******Group 3******* | |
CD44B | 39800100-00106 JXE00102-00123, 129 |
*******Group 4******* | |
CB44B | JXL00100-00184 NSL00100-00107, 109-218 TWC00100-00149, 151-154 |
PARTS NEEDED
Qty |
Part Number | Description |
*******Group 1******* | ||
4 | 8C3392 | ROD END-SPHER |
4 | 8T4192 | BOLT-HEX HEAD |
4 | 8T4194 | BOLT-HEX HEAD |
16 | 8T4223 | WASHER-HARD |
4 | 3293356 | NUT-HEX |
8 | 3445674 | NUT-HEX |
4 | 4211725 | PLATE |
4 | 4917479 | BRACKET AS |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 2******* | ||
4 | 8C3392 | ROD END-SPHER |
4 | 8T4192 | BOLT-HEX HEAD |
4 | 8T4194 | BOLT-HEX HEAD |
16 | 8T4223 | WASHER-HARD |
4 | 3293356 | NUT-HEX |
8 | 3445674 | NUT-HEX |
4 | 4211725 | PLATE |
4 | 4917479 | BRACKET AS |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 3******* | ||
4 | 8C3392 | ROD END-SPHER |
4 | 8T4192 | BOLT-HEX HEAD |
4 | 8T4194 | BOLT-HEX HEAD |
16 | 8T4223 | WASHER-HARD |
4 | 3293356 | NUT-HEX |
8 | 3445674 | NUT-HEX |
4 | 4211725 | PLATE |
4 | 4917479 | BRACKET AS |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
*******Group 4******* | ||
4 | 8C3392 | ROD END-SPHER |
4 | 8T4192 | BOLT-HEX HEAD |
4 | 8T4194 | BOLT-HEX HEAD |
16 | 8T4223 | WASHER-HARD |
4 | 3293356 | NUT-HEX |
8 | 3445674 | NUT-HEX |
4 | 4211725 | PLATE |
4 | 4917479 | BRACKET AS |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Refer to the Service Manual if/as necessary and see Special Instruction SEHS0529 for instructions on reworking the scraper mounting configuration. |