Usage:
(1) Bore in liner (new) ... 5.401 ± .001 in.(137.19 ± 0.03 mm)
Maximum permissible bore when measured near upper end of the wear surface of the cylinder liner (worn) ... 5.408 in.(137.36 mm)
"Use again" maximum bore (when measured near upper end of the wear surface of the cylinder liner) ... 5.405 in.(137.29 mm)
(2) Thickness of flange on liner ... .3500 ± .0008 in.(8.890 ± 0.020 mm)
(3) Filler Band.
Installation procedure:
Put liquid soap on seals, liner grooves and bore in cylinder block. Install seals on bottom of liner. Put filler band(s) in SAE 30 oil for a moment, then install it on the liner. Install the liner in the cylinder block immediately after the band is installed on the liner (before expansion of the band).
NOTE: Make reference to GUIDELINE FOR REUSABLE PARTS; PISTONS AND CYLINDER LINERS, FORM NO. SEBF8001.