Fuel Priming Pump
Usage:
Disassemble Fuel Priming Pump
start by:
a) remove fuel priming pump
1. Put pins (1) in and pull rod out of barrel. Remove the pins and springs.
2. Remove pin from the handle and remove the handle, cap (2) and spring (3). Remove the seal from cap. Remove seal and ring from rod.
Assemble Fuel Priming Pump
1. Install seal and ring on rod.
2. Install seal on cap. Install spring, cap and handle on rod. Install pin in handle.
3. Put SAE 10 engine oil in the bore of the barrel.
4. Install tool (A) on the plunger and install the plunger in barrel. Remove tool (A).
5. Install springs and pins in cap and install cap in barrel.
end by:
a) install fuel priming pump
Caterpillar Information System:
1693 DIESEL TRUCK ENGINE Fuel Transfer Pump
1693 DIESEL TRUCK ENGINE Fuel Transfer Pump, Fuel Priming Pump
1693 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
1693 DIESEL TRUCK ENGINE Governor
1693 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1693 DIESEL TRUCK ENGINE Fuel Ratio Control
1693 DIESEL TRUCK ENGINE Fuel Ratio Control, Fuel Shutoff Solenoid
1693 DIESEL TRUCK ENGINE Electric Starting Motor
1693 DIESEL TRUCK ENGINE Aftercooler
1693 DIESEL TRUCK ENGINE Air Compressor
1693 DIESEL TRUCK ENGINE Oil Filter Base
1693 DIESEL TRUCK ENGINE Oil Filter Base
1693 DIESEL TRUCK ENGINE Accessory Drive, Turbocharger
1693 DIESEL TRUCK ENGINE Accessory Drive
1693 DIESEL TRUCK ENGINE Variable Timing Unit
1693 DIESEL TRUCK ENGINE Turbocharger
1693 DIESEL TRUCK ENGINE Pulley And Vibration Damper
1693 DIESEL TRUCK ENGINE Crankshaft Front Seal
1693 DIESEL TRUCK ENGINE Front Cover
1693 DIESEL TRUCK ENGINE Exhaust Manifold
1693 DIESEL TRUCK ENGINE Glow Plugs
1693 DIESEL TRUCK ENGINE Oil Pan
1693 DIESEL TRUCK ENGINE Oil Pump
1693 DIESEL TRUCK ENGINE Camshafts