PRODUCT IMPROVEMENT PROGRAM FOR ADDING A BRACKET TO THE ALTERNATOR GROUP ON CERTAIN C18 INDUSTRIAL ENGINES
Usage:
SEBE9932-00
Show/hide table
| 06Sep2006 |
U-618
A-602
D-586
O-598
Show/hide table
| After Failure Only | PRODUCT IMPROVEMENT PROGRAM FOR ADDING A BRACKET TO THE ALTERNATOR GROUP ON CERTAIN C18 INDUSTRIAL ENGINES |
|
| 1405 | PS51222 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51222" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Sep2008 |
PROBLEM
Show/hide table
| The alternator mounting allows the alternator to move front to rear which causes the 4N-4942 adjusting eyebolt to fracture. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C18 | WJH00113, 116-118, 120-121, 127-128, 140-146, 149-181, 183-211, 213-216, 218-259, 262-266, 268-349, 351-493, 495-497, 499-611, 613, 616-629, 631-851, 853-917, 919-995 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 2 | 0S1591 | BOLT |
| 1 | 2826844 | BRACKET |
| 1 | 2A1531 | BOLT |
| 1 | 4N4942 | ROD-ADJUSTING |
ACTION REQUIRED
Show/hide table
| A new mounting bracket has been designed to stiffen the alternator mount. The part number is 282-6844. The adjusting rod(eyebolt) 4N-4942 will need relocated to the back side of the lower alternator flange and mounting block. Please see installation illustrations. |
Show/hide table
|
| Image1 |
|
| Image2 |
|
| Image3 |
|
| Image4 |
|
| Image5 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-36 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SCAC WATER TEMPERATURE REGULATOR ON CERTAIN PETROLEUM 3512C ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SCAC WATER TEMPERATURE REGULATOR ON CERTAIN PETROLEUM 3512C ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINES ON CERTAIN C32 PETROLEUM AND EPG ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINES ON CERTAIN C32 PETROLEUM AND EPG ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VARIABLE VALVE ACTUATION OIL PRESSURE SENSOR ON CERTAIN C15 ACERT HIGHWAY TRUCKS ENGINES. PRODUCT SUPPORT PROGRAM FOR REPLACING THE VARIABLE VALVE ACTUATION OIL PRESSURE SENSOR ON CERTAIN C15 ACERT HIGHWAY TRUCKS ENGINES.
PRODUCT SUPPORT PROGRAM FOR INSTALLING VALIDATION AUXILIARY PUMPS ON CERTAIN 3500 ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING VALIDATION AUXILIARY PUMPS ON CERTAIN 3500 ENGINES
Product Support Program for replacing Charge Air Pipes (149-1986 & 149-1987)on 3516B HD Vossloh Locomotive Engines. Product Support Program for replacing Charge Air Pipes (149-1986 & 149-1987)on 3516B HD Vossloh Locomotive Engines.
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING FAN MOUNTING BOLTS ON CERTAIN G3304 AND G3306 ENGINES WITH RADIATOR AND FAN GROUP PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING FAN MOUNTING BOLTS ON CERTAIN G3304 AND G3306 ENGINES WITH RADIATOR AND FAN GROUP
PRODUCT SUPPORT PROGRAM FOR SEALING FUEL MANIFOLD LEAKS ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR SEALING FUEL MANIFOLD LEAKS ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
Product support program for replacing exhaust bellows and installing inner heat shields on certain 3500B Marine Propulsion and Marine Auxiliary engines Product support program for replacing exhaust bellows and installing inner heat shields on certain 3500B Marine Propulsion and Marine Auxiliary engines
PRODUCT IMPROVEMENT PROGRAM TO REPLACE ENGINE CONTROL SOFTWARE ON CERTAIN C11, C13, AND C15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM TO REPLACE ENGINE CONTROL SOFTWARE ON CERTAIN C11, C13, AND C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR ADDING A DIODE INLINE TO THE WIRING HARNESS FOR THE AIR SHUTOFF ON CERTAIN 3508B AND 3512B ENGINES PRODUCT SUPPORT PROGRAM FOR ADDING A DIODE INLINE TO THE WIRING HARNESS FOR THE AIR SHUTOFF ON CERTAIN 3508B AND 3512B ENGINES
Product Improvement Program for adding the ECM reset timer relay scheme on certain 3456 Common Design Generator Sets Product Improvement Program for adding the ECM reset timer relay scheme on certain 3456 Common Design Generator Sets
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE TORSIONAL VIBRATION DAMPER ASSEMBLY AND FRONT GEAR TRAINS ON CERTAIN C32 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE TORSIONAL VIBRATION DAMPER ASSEMBLY AND FRONT GEAR TRAINS ON CERTAIN C32 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FUEL COOLER ON CERTAIN C15 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FUEL COOLER ON CERTAIN C15 MARINE ENGINES
Product Supprot Program for Installation of an inner shield to the exhaust manifold for certain 3500B Engines Product Supprot Program for Installation of an inner shield to the exhaust manifold for certain 3500B Engines
PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program for removing 9Y-0916 rectifiers and associated heat sink assemblies from dealer inventory. Product Improvement Program for removing 9Y-0916 rectifiers and associated heat sink assemblies from dealer inventory.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R8849 CYLINDER HEADS AND CERTAIN 0R7907 LONG BLOCKS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R8849 CYLINDER HEADS AND CERTAIN 0R7907 LONG BLOCKS FROM DEALERS PARTS STOCK
Product support program for reworking lines gp - water 279-0117 on power module aftercoolers for certain PM3516B Engines Product support program for reworking lines gp - water 279-0117 on power module aftercoolers for certain PM3516B Engines
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Preliminary Notes
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Handling / Storage