Stopping
Usage:
- 1. Remove the load from the engine.
- 2. Allow the engine to run at about half speed for five minutes. This reduces internal temperatures and prevents the loss of coolant by "afterboil".
- 3. Reduce speed to low idle for about 30 seconds.
- 4. DO NOT race the engine before shut off. This causes the turbocharger to "coast" without lubrication.
- 5. Turn gas valve off to stop the engine. Do not use emergency stop button except in emergencies.
Caterpillar Information System:
G343 INDUSTRIAL ENGINE Starting
G343 INDUSTRIAL ENGINE Initial Adjustments
G343 INDUSTRIAL ENGINE Periods Of Limited Use
G343 INDUSTRIAL ENGINE Safety Precautions
G343 INDUSTRIAL ENGINE General
G343 INDUSTRIAL ENGINE Model View
G333 & 3306 NATURAL GAS ENGINES Lubrication And Maintenance Procedures
G333 & 3306 NATURAL GAS ENGINES Refill Capacities (Approximate)
G333 & 3306 NATURAL GAS ENGINES Recommended Viscosities At Various Starting Temperatures
G333 & 3306 NATURAL GAS ENGINES Lubrication And Maintenance Chart
G333 & 3306 NATURAL GAS ENGINES Generator Storage
G333 & 3306 NATURAL GAS ENGINES Electric Set Operation
G343 INDUSTRIAL ENGINE Attachments
G343 INDUSTRIAL ENGINE Determining Cause Of Shutdown
G343 INDUSTRIAL ENGINE Woodward UG8 Governor
G343 INDUSTRIAL ENGINE Altitude Operation
G343 INDUSTRIAL ENGINE General
G343 INDUSTRIAL ENGINE Safety Precautions
G343 INDUSTRIAL ENGINE Identification
G343 INDUSTRIAL ENGINE Three Phase Neutral Connections
G343 INDUSTRIAL ENGINE Voltage Connections
G343 INDUSTRIAL ENGINE Operating
G343 INDUSTRIAL ENGINE Single Unit Operation
G343 INDUSTRIAL ENGINE Parallel Operation