Generator Storage
Usage:
When a generator is stored for any length of time moisture condenses in the windings. Minimize the condensation by providing a dry storage space.
To remove moisture caused by high humidity or dampness, dry the generator by one of the following methods:
- 1. Place the generator in an oven and bake at a temperature not above 185°F (85°C) for four hours.
Show/hide table
NOTICE |
---|
If an oven is used for drying, use a forced air type rather than a radiant type. Radiant ovens can cause localized overheating. |
- 2. Enclose the generator and heating lamps in canvas to raise the temperature. Leave an opening in the top for the moisture to escape.
- 3. Pass a low voltage current through the windings to raise the temperature of the windings to 185°F (85°C).
If there is a possibility the insulation resistance has deteriorated to a dangerously low level, contact your Caterpillar Dealer.
If a brush type generator (SRCR) is to be stored for a prolonged time, lift the brushes off the slip ring to prevent chemical action from damaging the slip ring.
Caterpillar Information System:
G333 & 3306 NATURAL GAS ENGINES Electric Set Operation
G333 & 3306 NATURAL GAS ENGINES Electric Set Operation Instructions
G333 & 3306 NATURAL GAS ENGINES Altitude Operation
G333 & 3306 NATURAL GAS ENGINES Woodward UG8 Governor
G333 & 3306 NATURAL GAS ENGINES Determining Cause Of Shutdown
G333 & 3306 NATURAL GAS ENGINES Attachments
G333 & 3306 NATURAL GAS ENGINES Stopping
G333 & 3306 NATURAL GAS ENGINES Starting
G333 & 3306 NATURAL GAS ENGINES Gas Engine Operation
G333 & 3306 NATURAL GAS ENGINES Foreword
D348 MARINE ENGINE Miscellaneous Maintenance
D348 MARINE ENGINE Power Coupling System
G333 & 3306 NATURAL GAS ENGINES Lubrication And Maintenance Chart
G333 & 3306 NATURAL GAS ENGINES Recommended Viscosities At Various Starting Temperatures
G333 & 3306 NATURAL GAS ENGINES Refill Capacities (Approximate)
G333 & 3306 NATURAL GAS ENGINES Lubrication And Maintenance Procedures
G343 INDUSTRIAL ENGINE Model View
G343 INDUSTRIAL ENGINE General
G343 INDUSTRIAL ENGINE Safety Precautions
G343 INDUSTRIAL ENGINE Periods Of Limited Use
G343 INDUSTRIAL ENGINE Initial Adjustments
G343 INDUSTRIAL ENGINE Starting
G343 INDUSTRIAL ENGINE Stopping
G343 INDUSTRIAL ENGINE Attachments