Gear Group (Rear)
Show/hide table
Illustration 1 | g06096956 |
Show/hide table
Specification for 487-7470 Rear Gear Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 2 | 101-1364 Idler Gear As | Bore of 125-9751 Bushing after installation is Installation depth is |
2 | 2 | 101-1368 Thrust Washer | Thickness is |
3 | 1 | 114-3372 Idler Gear As | Bore of 101-1372 Bushing after installation is Installation depth is |
4 | 1 | 101-1366 Gear Shaft | Diameter is |
5 | 4 | 8M-2530 Bolt | Torque to |
6 | 2 | - | Before assembly, clean the taper of the camshaft and the tapered bore of the camshaft drive gear with lint free cloth saturated with cleaning solvent to remove excess oil. Clean with alcohol wipe. |
7 | 2 | 8S-2331 Bolt | Torque to |
Show/hide table
Illustration 2 | g06096958 |
Rear view |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
8 | 2 | 101-1367 Idler Shaft | Diameter is |
9 | 4 | 1B-4367 Bolt | Torque to |
Caterpillar Information System:
C175-20 Locomotive Engine Aftercooler Core - Inspect/Clean
PM820, PM822, and PM825 Cold Planer Machine Systems Upper Sheave (Rotor Drive) - Remove and Install
C175-16 Locomotive Engine Thermostatic Valve - Inspect
C280 Marine Engines Solenoid Valve (DEF Return)
C175-16 and C175-20 Locomotive Engines Fuel Lines - Install - High Pressure
New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920} New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920}
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Camshaft
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
SPF343 and SPF343C Trailer Mounted Pumpers Model View Illustrations
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Install
C280 Marine Engines Diesel Exhaust Fluid Tank
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pivot - Remove and Install
C280 Marine Engines Air Pressure Regulator Group
SPF343 and SPF343C Trailer Mounted Pumpers Engine Oil Level - Check
SPF343 and SPF343C Trailer Mounted Pumpers Manual Stop Procedure
SPF343 and SPF343C Trailer Mounted Pumpers Coolant Level - Check
SPF343 and SPF343C Trailer Mounted Pumpers Gauges and Indicators
PM820, PM822, and PM825 Cold Planer Machine Systems Flashing (Conveyor) - Remove and Install
SPF343 and SPF343C Trailer Mounted Pumpers Monitoring System
C12.9 Marine Engines Camshaft Bearings - Remove and Install
HPU300 Hydraulic Power Pack Storage
HPU300 Hydraulic Power Pack Daily Inspection