Stopping
Usage:
- 1. Remove the load from the engine.
- 2. Allow the engine to run at about half speed for five minutes. This reduces internal temperatures and prevents the loss of coolant by "afterboil".
- 3. Reduce speed to low idle for about 30 seconds.
- 4. DO NOT race the engine before shut off. This causes the turbocharger to "coast" without lubrication.
- 5. Turn gas valve off to stop the engine. Do not use emergency stop button except in emergencies.
Caterpillar Information System:
G333 & 3306 NATURAL GAS ENGINES Starting
G333 & 3306 NATURAL GAS ENGINES Gas Engine Operation
G333 & 3306 NATURAL GAS ENGINES Foreword
D348 MARINE ENGINE Miscellaneous Maintenance
D348 MARINE ENGINE Power Coupling System
D348 MARINE ENGINE Electrical System
D348 MARINE ENGINE Starting System
D348 MARINE ENGINE Cooling System
D348 MARINE ENGINE Fuel System
D348 MARINE ENGINE Air Induction And Exhaust System
D348 MARINE ENGINE Engine Lubrication System
D348 MARINE ENGINE Lubrication And Maintenance Chart D346-D348-D349 (40J1-Up), (38J1-Up), (62P1-Up) Marine Engines
G333 & 3306 NATURAL GAS ENGINES Attachments
G333 & 3306 NATURAL GAS ENGINES Determining Cause Of Shutdown
G333 & 3306 NATURAL GAS ENGINES Woodward UG8 Governor
G333 & 3306 NATURAL GAS ENGINES Altitude Operation
G333 & 3306 NATURAL GAS ENGINES Electric Set Operation Instructions
G333 & 3306 NATURAL GAS ENGINES Electric Set Operation
G333 & 3306 NATURAL GAS ENGINES Generator Storage
G333 & 3306 NATURAL GAS ENGINES Lubrication And Maintenance Chart
G333 & 3306 NATURAL GAS ENGINES Recommended Viscosities At Various Starting Temperatures
G333 & 3306 NATURAL GAS ENGINES Refill Capacities (Approximate)
G333 & 3306 NATURAL GAS ENGINES Lubrication And Maintenance Procedures
G343 INDUSTRIAL ENGINE Model View