G3516 TA Engine Caterpillar


Camshaft

Usage:

G3516 AL7
The engine has two camshafts. The camshafts are driven by the gears at the rear of the engine.


Illustration 1g00807910
Connections for a two-piece camshaft
(1) Dowel
(2) Spacer
(3) Bolt

The engine has two-piece camshafts. Dowel (1) in one section of the camshaft goes through spacer (2) into the other section of the camshaft. The sections are joined by bolts (3).

As the camshaft turns, each lobe moves a lifter assembly. Each cylinder has two lifter assemblies. Each lifter assembly moves a pushrod and two inlet valves or two exhaust valves. The camshafts must be timed with the crankshaft. The relation of the camshaft lobes to the crankshaft position causes the valves in each cylinder to operate at the correct time.

Caterpillar Information System:

G3516 TA Engine Cooling System
G3516 TA Engine Accumulator
G3516 TA Engine Lubrication System
G3516 TA Engine Valve System Components
G3516 TA Engine Exhaust Bypass Valve
G3516 TA Engine Turbocharger
G3516 TA Engine Aftercooler
G3516 TA Engine Air Inlet and Exhaust System Components
G3516 TA Engine Gas Pressure Regulator
Caterpillar Machine Fluids Recommendations Reference Material
G3516 TA Engine Ignition System
G3508J, G3516J, and G3520J Engines Fuel Control Valve - Remove and Install
C175-16 Locomotive Engine Aftercooler Coolant Pressure Is Low
C18 Generator Set Engines Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Aftercooler Coolant Temperature Is High
C175-16 Locomotive Engine Air Assist Pressure Is High
New Pressure Sensor Group Is Now Used On Certain 3512 and 3516 Engines With EMCP 4.x Controls {1408} New Pressure Sensor Group Is Now Used On Certain 3512 and 3516 Engines With EMCP 4.x Controls {1408}
G3516 TA Engine Engine Governing - Adjust
G3516 TA Engine Manifold Air Pressure Sensor
A New NRS Cooler Assembly Is Now Used for Certain C15 and C18 Industrial Engines {108G} A New NRS Cooler Assembly Is Now Used for Certain C15 and C18 Industrial Engines {108G}
G3516 TA Engine Ignition Timing - Adjust
G3516 TA Engine Air/Fuel Ratio Control - Adjust
New Contactor is Now Used as a Replacement for Prior Jacket Water Heater Relays for Certain C9, C15, and C18 Generator Set Engines {4460, 7426} New Contactor is Now Used as a Replacement for Prior Jacket Water Heater Relays for Certain C9, C15, and C18 Generator Set Engines {4460, 7426}
C175-16 Locomotive Engine Air Assist Pressure Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.