Radiator - Remove and Install - SCAC
Start By:
- Remove the jacket water radiator.
- Remove tube and bracket assembly (1).
Show/hide table
Illustration 2 g03880625 - Disconnect hose assembly (2).
Show/hide table
Illustration 3 g03880626 - Remove couplers (4) from the bottom tank. Remove bolts (3) from both sides of the radiator assembly.
Show/hide table
Illustration 4 g03880629 - Attach a suitable lifting device to radiator assembly (6). Remove bolts (7) from both sides of radiator assembly (6) and remove radiator assembly (6). The weight of radiator assembly (6) is approximately
210 kg (463 lb) .Show/hide tableIllustration 5 g03880630 - Position radiator assembly (7) as shown. Remove bolts (8) and top tank (9).
Show/hide table
Illustration 6 g03880631 - Remove bolts (10) and bottom tank (11).
Show/hide table
Illustration 7 g03880632 - Remove bolts (12) and brace (13).
Show/hide table
Illustration 8 g03880657 - Remove radiator core assemblies (14).
Show/hide table
Illustration 1 | g03880624 |
- Install radiator assembly (7) in the reverse order of removal.
Caterpillar Information System:
C18 MAR GENSET Electric Power Generation Radiator - Remove and Install
Installation of the Dual Layered Shielded (DLS) Manifold System For Certain G3516 Engines {1052, 1059, 1063, 1067, 1071, 1380} Installation of the Dual Layered Shielded (DLS) Manifold System For Certain G3516 Engines {1052, 1059, 1063, 1067, 1071, 1380}
558 Forest Machine Machine Systems Check Valve (Return Makeup) - Slow Return Check Valve
2015/09/17 New Software Is Used for Certain C10, C12, and C16 Engines {1920, 7620}
3516E Generator Set Engine Diagnostic Trouble Codes
C7.1 Commercial Marine Engine Cleanliness of Fuel System Components
558 Forest Machine Machine Systems Hydraulic Oil Cooler
3516E Generator Set Engine Event Codes
C15 Generator Set Maintenance Interval Schedule - Emergency Standby Power
C15 Generator Set Maintenance Interval Schedule - Standby
C15 Generator Set Maintenance Interval Schedule - PRIME POWER
C18 MAR GENSET Electric Power Generation Expansion Tank - Remove and Install
3516E Generator Sets Engine Starting
3516E Generator Set Cold Weather Starting
3516E Generator Sets Emergency Stopping
797F Off-Highway Truck Field Assembly Wheel, Brake and Suspension (Front) - Install
2015/08/28 A New Oil Pump and Tube Assemblies Are Now Used for Certain C9 Truck Engines {1304, 1307, 1315}
Installation Instructions for New Air Inlet Lines and Fuel Lines on Certain G3500B Engines {1071, 1274} Installation Instructions for New Air Inlet Lines and Fuel Lines on Certain G3500B Engines {1071, 1274}
3516E Generator Sets Battery Disconnect Switch
558 Forest Machine Machine Systems Bypass Valve (Return) - Bypass Check Valve
3516E Generator Sets Belts - Inspect/Adjust/Replace
3516E Generator Sets Fuel System Secondary Filter - Replace
3516E Generator Sets Starting Motor - Inspect
3516B Generator Set Engines with Dynamic Gas Blending Coolant Level - Test