Accessory Drive (Front) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 207-1601 | Rubber Lubricant | - |
Start By:
- Remove water pump.
- Remove auxiliary water pump.
- Remove engine oil pump.
- Remove vibration damper.
- Remove bolts (1), pump adapter (2), and the O-ring seal.
Show/hide table
Illustration 2 g03850883 - Remove bolts (5) and thrust washers (6).
- Remove bolts (3), pump adapter (4), and the O-ring seal.
Show/hide table
Illustration 3 g03851161 - Remove bolts (7), pump drive shaft (9), and accessory drive gear (8).
Show/hide table
Illustration 4 g03851439 - Remove bolts (10), idler shaft (11), and the O-ring seals.
Show/hide table
Illustration 5 g03851456 - Remove bolts (15), cover (14), and the O-ring seals.
- Remove thrust washer (12), idler gear (13), and the dowel.
Show/hide table
Illustration 6 g03851208 - Remove bolts (16), pump cover (17), and the O-ring seal.
Show/hide table
Illustration 7 g03851318 - Remove bolts (18), auxiliary drive adapter (19), and the O-ring seals.
Show/hide table
Illustration 8 g03851325 - Remove bolts (20), cover (21), and the O-ring seals.
- Remove bolts (22), auxiliary drive shaft (23), and accessory drive gear (24).
Show/hide table
Illustration 9 g03851513 - Remove bolts (26), idler shaft (25), and the O-ring seal.
Show/hide table
Illustration 10 g03851549 - Remove thrust washer (27), idler gear (28), and the dowel.
Show/hide table
Illustration 1 | g03850694 |
- Install the accessory drive in the reverse order of removal.
- Lubricate the bore of idler shaft (25), idler shaft (11), auxiliary drive shaft (23) auxiliary drive adapter (19), and pump drive shaft (9) with the fluid being sealed.
- Apply Tooling (A) to the O-ring seals of cover (21) and cover (14).
Caterpillar Information System:
A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704} A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704}
C27 and C32 Industrial Engines Maintenance Interval Schedule
C8.7 Marine Engine Inlet and Exhaust Valves - Remove and Install
False Intake Manifold Air Temperature Causing Shutdown on Certain G3412 Engines with EMCP 4.2 Panels{1920, 4490, 7490} False Intake Manifold Air Temperature Causing Shutdown on Certain G3412 Engines with EMCP 4.2 Panels{1920, 4490, 7490}
2015/06/26 New Software Is Now used on Certain C11 Engines {7620}
2015/07/07 A New Liner Seal Is Used on Certain G3300 Engines {1201}
2015/07/07 Timer Rework for Overhead Lights in XQ2000 {1429}
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
330F MHPU Mobile Hydraulic Power Unit Track Adjustment - Adjust - If Equipped
3512C Generator Set Engine Valve Mechanism Cover Base - Remove and Install
Incorrect Announcement of Battery Overcharged On Certain C4.4 and C6.6 Generator Set{4490, 751B} Incorrect Announcement of Battery Overcharged On Certain C4.4 and C6.6 Generator Set{4490, 751B}
3512C Generator Set Engine Crankcase Breather - Remove and Install
Rebuild Instructions for the High Temperature Throttle Used on Certain G3500C and G3500E Engines {1269} Rebuild Instructions for the High Temperature Throttle Used on Certain G3500C and G3500E Engines {1269}
794 AC Off-Highway Truck Field Assembly Exhaust - Install
C4.4 and C7.1 Engines Service Tool Features
C27 and C32 Industrial Engines Product Description
C27 and C32 Industrial Engines Refill Capacities
C4.4 and C7.1 Engines Service Tool Error Identifiers
C27 and C32 Industrial Engines Overhaul Considerations
C280-08 Tier 4 Engine Engine Oil Coolers - Remove and Install
CG137-08 and CG137-12 Engines Sound Information
CG137-08 and CG137-12 Engines Model View Illustrations
C280-08 Tier 4 Engine Engine Oil Coolers - Disassemble
C8.7 Marine Engine Camshaft Bearings - Remove and Install