Timer Rework for Overhead Lights in XQ2000 {1429}
- Power Module:
- PM3516 (S/N: NBR1-UP)
Description of Change: The new auxiliary relay provides more resistance to fatigue and a longer service life.
Adaptable To: The timer contact were found to be marginal when powering six 9X-1439 Flood Lamps. Eventually the timer will fail because timer is being operated above the rated current limit.
The new auxiliary relay is adaptable to the above engines back to first production.
The required parts for installation are listed in Table 1.
Show/hide table
Part Number     | Description     | Qty     |
470-4765     | Relay     | 1     |
Rework Procedure
- Open the weather box located above the ceiling and the one closes to the DC timer.
Show/hide table
Illustration 1 | g03853559 |
- Drill a 28.3 mm (1.115 inch) in diameter hole for a 3/4" conduit connector as shown in Illustration 1.
- Install the 470-4765 Relay as shown in Illustration 2.
Show/hide table
Illustration 2 | g03853562 |
- Connect the wires per schematic in Illustration 3
Show/hide table
Illustration 3 | g03853565 |
- Cut and stow excess unused wires as shown in Illustration 4.
Show/hide table
Illustration 4 | g03853566 |
- Test the circuit by turning on the DC timer
- Close the weather box as shown in Illustration 5.
Show/hide table
Illustration 5 | g03854250 |
- Installation is complete.
Caterpillar Information System:
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
330F MHPU Mobile Hydraulic Power Unit Track Adjustment - Adjust - If Equipped
3512C Generator Set Engine Valve Mechanism Cover Base - Remove and Install
Incorrect Announcement of Battery Overcharged On Certain C4.4 and C6.6 Generator Set{4490, 751B} Incorrect Announcement of Battery Overcharged On Certain C4.4 and C6.6 Generator Set{4490, 751B}
3512C Generator Set Engine Crankcase Breather - Remove and Install
3512C Generator Set Engine Engine Oil Pan - Assemble
794 AC Off-Highway Truck Field Assembly Steering Lines - Install
Customer Interface for Certain G3600 A4 Engines {1901, 4490, 7451} Customer Interface for Certain G3600 A4 Engines {1901, 4490, 7451}
C4.4 and C7.1 Engines Speed Control - Test - Analog
3512C Generator Set Engine Engine Oil Pan - Disassemble
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Truck Engine Applications {1278}
2015/06/26 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Engine Applications {1278}
2015/07/07 A New Liner Seal Is Used on Certain G3300 Engines {1201}
2015/06/26 New Software Is Now used on Certain C11 Engines {7620}
False Intake Manifold Air Temperature Causing Shutdown on Certain G3412 Engines with EMCP 4.2 Panels{1920, 4490, 7490} False Intake Manifold Air Temperature Causing Shutdown on Certain G3412 Engines with EMCP 4.2 Panels{1920, 4490, 7490}
C8.7 Marine Engine Inlet and Exhaust Valves - Remove and Install
C27 and C32 Industrial Engines Maintenance Interval Schedule
A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704} A New Gas Shutoff Valve Is Available For Certain G3306 and G3306B Engines {1259, 1704}
3512C Generator Set Engine Accessory Drive (Front) - Remove and Install
Rebuild Instructions for the High Temperature Throttle Used on Certain G3500C and G3500E Engines {1269} Rebuild Instructions for the High Temperature Throttle Used on Certain G3500C and G3500E Engines {1269}
794 AC Off-Highway Truck Field Assembly Exhaust - Install
C4.4 and C7.1 Engines Service Tool Features
C27 and C32 Industrial Engines Product Description
C27 and C32 Industrial Engines Refill Capacities