New Ring Gears Used In Flywheel Assemblies
Usage:
3306 Industrial Engines
Description of Change: Two new ring gears, that are flame hardened, are used in the flywheel assemblies on 3306 Industrial Engines. The new ring gears are made from a different material and have more resistance to "chipping" than the former ring gears.
Adaptable As: The new ring gears are a direct replacement for the former ring gears, which have been canceled.
NOTE: If a flywheel assembly is ordered, the new ring gear will be sent automatically.
Caterpillar Information System:
1979/04/25 Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25 During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal
1979/04/25 Dowtherm Test Strips No Longer Available
1979/04/25 New Exhaust Valve Has Improved Three-Piece Construction
1979/04/25 Inspection Of Oil Filters In Parts Stocks
1979/04/25 New Oil Cooler Bonnets Used On 3408 And 3412 Engines
1979/04/25 How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25 Inspection Of Oil Pump After Long Periods Of Service Can Prevent Engine Damage
1979/04/25 Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems
1979/04/25 Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25 Inspection Of Connecting Rods In Parts Stocks
1979/04/25 6V112 Repair Kit Available For Parts Service Of The 8H8558 Nut Spinner
1979/05/09 Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block
1979/05/09 New " Drive 6V94 Universal Joint Is Available
1979/05/09 Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09 How To Adapt The 5P1759 Tachometer Drive Group (Dealer Tool) To D353 Engines Equipped With Electric Hour Meters When Engine RPM Must Be Checked
1979/05/09 New Oil Pump Has Improved Relief Valve For Better Pressure Control
1979/05/09 Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09 List Of Service Publications
1979/05/09 New Design Exhaust Gasket Used In Air Lines Group
1979/05/09 Change In Part Number Of Water Temperature Regulator Used In Attachment Oil Cooler Groups
1979/05/09 New BrakeSaver Manifold Prevents Oil Leakage
1979/05/23 New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23 New Flywheel Housing Corrects Clearance Problem With Cylinder Block