Illustration 1 | g02859356 |
Typical example |
(1) The bearing shell for the connecting rod
For the correct procedure to install the bearing shell for the connecting rod, refer to Disassembly and Assembly, "Pistons and Connecting Rods - Assemble".
Thickness of Connecting Rod Bearing at the Center | |
Thickness of Bearing Cap at the Center | |
Bearing Clearance | |
Illustration 2 | g02844317 |
Typical example (A) Class of weight (B) Part number (C) Date of production (DD/MM) (D) Date of production (Year) (E) Serial number markings on the connecting rod and connecting rod cap |
The mating surfaces of the connecting rod are produced by hydraulically fracturing the forged connecting rod. Ensure that the correct cap for the connecting rod is installed with the correct connecting rod. Ensure that the serial numbers (E) for both components match. Refer to illustration 2 for more information.
(2) Torque of the setscrews for the connecting rod ...
Tighten the setscrews (2) for the connecting rod for an additional 70 degrees. The setscrews for the connecting rod must be replaced after this procedure.
Illustration 3 | g02859357 |
Typical example |
(3) Diameter of the finished bore for the piston pin ...
(4) Distance between the parent bores ...
(5) Diameter for the finished bore for the connecting rod bearing ...
Refer to table 2 for the length of connecting rod.
Specifications for the Connecting Rod | ||
---|---|---|
Length Of The Connecting Rod | ||
|