Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000} Caterpillar


Certain C18 Marine Propulsion Engines Have Incorrect Overhaul (Top End) and Overhaul (Major) Intervals Published{1000}

Usage:

C18 CKH
Marine Engine:
C18 MARINE (S/N: PLE1-UP; CKH1-UP)

Introduction

The problem that is identified has a known permanent solution. Use the solution that is identified below.

Problem

An inadvertent change was made to Operation and Maintenance Manual, SEBU7689, "C18 Marine Engine" during a revision.

The correct maintenance interval for Overhaul (Top End) is every 284,000 L (75,000 US gal) of fuel or 5,000 service hours. The correct maintenance interval for overhaul considerations is every 570,000 L (150,000 US gal) of fuel or 10,000 service hours.

Note: Use which ever occurs first in order to determine the maintenance intervals: fuel consumption, service hours, and calendar time.

Solution

The Operation and Maintenance Manual is being updated to reflect these changes.

Caterpillar Information System:

C8.7 Marine Engine Before Starting Engine
2014/04/11 New Engine Software Is Now Used on Certain C15 and C18 Generator Engines {1901, 1920}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies DC Bus Capacitor - Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Maintenance Interval Schedule
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Integral Pump Drive, Retarder
2013/12/05 A New Hose and Clamp for the Water Lines Group Are Used for Certain C15 and C18 Engines {1380}
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Dropbox
2013/10/17 A New Oil Pan Group Is Available for C27 Industrial Engines Used in RH120 Shovels {1302}
390F Excavator Machine Systems Control Valve (Stick Lowering)
795F AC and 795F AC XQ Off-Highway Truck Hydraulic System and Brakes Oil Filter (Brake)
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies DC Bus Capacitor - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Maintenance Interval Schedule
C12.9 Marine Engines Coolant Level - Check
CX31-P600 Petroleum Transmission Transmission Hydraulic Control - Integral Pump Drive, No Retarder
C15 and C18 Tier 4 Final Engines Engine Valve Lash - Inspect/Adjust
C12.9 Marine Engines Overhaul (Major)
C8.7 Marine Engine Fire Prevention and Explosion Prevention
C8.7 Marine Engine Sensors and Electrical Components
C32 Marine Generator Set Refill Capacities
C18 Marine Engine Refill Capacities
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Hazard Information
C18 Generator Set Coolant - Change
C4.4 Industrial Engine Refill Capacities
C32 Marine Engine Maintenance Interval Schedule
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.