2014/08/01 Caterpillar


A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}

Usage:

C175-16 3A9
Electric Power Generation:
C175-16 (S/N: WYB1-UP)
Engine:
C175-16 (S/N: M6A1-UP; Y3A1-UP; M6B1-UP; WYC1-UP; P6L1-UP; R1X1-UP; 3A91-UP)
C175-20 (S/N: BXR1-UP)
Engine News SEBD9901, 03 October 2013, "A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines". Disregard the previous article, refer to the article that follows.

Description of Change: A new screen is used on the high-pressure fuel pump drive adapter. The screen filters return oil flow from the high-pressure fuel pump to the front gear train. The screen helps to prevent possible contamination of the engine front gear train from the high-pressure fuel pump gear train.

Adaptable To: The new 459-6534 Screen As replaces the existing 440-4285 Screen As. The new screen assembly is adaptable back to first production of the serial numbers listed above. Refer to Table 2 for the effective serial numbers.




Illustration 1g03454722

(1) 459-6534 Screen As

Table 1
Required Parts    
Qty     Part Number    
1     3P-1156 O-Ring Seal    
1     6V-5553 O-Ring Seal    
1     330-3517 O-Ring Seal    
1     459-6534 Screen As    

Table 2
Effectivity    
S/N:M6A01008-UP    
S/N:M6B01005-UP    
S/N:P6L01063-UP    
S/N:R1X00114-UP    
S/N:WYB01556-UP    
S/N:WYC01003-UP    
S/N:BXR01100-UP    
S/N:Y3A00125-UP    
S/N:3A900135-UP    

Caterpillar Information System:

G3306B Gas Engines Catalytic Converter
G3306B Gas Engines Temperature Sensor (Catalyst Outlet)
CG137-12 Petroleum Generator Set Engine Inlet Manifold Air Pressure Sensor
G3306B Gas Engines Cylinder Liner
G3306B Gas Engines Crankshaft Wear Sleeves and Seals
G3306B Gas Engines Electric Starting Motor
G3306B Gas Engines Wiring
794 AC Off-Highway Truck Coolant Level - Check
C7 and C9 Industrial Engines Coolant Level Is Low
C15 and C18 Engines for Caterpillar Built Machines ECM Software - Install
C13, C15, and C18 Tier 4 Final Engines Electrical Connectors - Inspect
C15 and C18 Engines for Caterpillar Built Machines Timing - Calibrate
2013/11/08 New Oil Heater Circulation Pumps and Seal Kits Are Available for Certain 3600 and C280 Engines {1333}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit CAN Data Link - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (Analog, Passive) - Test
2013/10/28 A New Outlet Elbow Is Available for Certain Commercial Engines {1307}
2014/12/23 A New Outlet Elbow Is Used on Certain Machine Engines {1307}
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Sample - Obtain
C18 Generator Set Refill Capacities
2013/10/01 New Software is Available for Certain Retrofit Selective Catalytic Reduction Systems (SCR) {1900, 1901, 1920}
C8.7 Marine Engine Engine Oil Level - Check
C12.9 Marine Engines Engine Oil and Filter - Change
Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333} Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333}
307, 308, 309 and 310 EXCAVATOR Boom
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.