Turbocharger
Show/hide table
 | |
| Illustration 1 | g03372060 |
Show/hide table
| Specification for 379-5366 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | Torque bolts to 35 ± 5 N·m (26 ± 4 lb ft). |
| 2 | 1 | 165-6673 Clamp As | Use the following procedure to tighten the clamp: 1. Tighten the clamp to 60.0 ± 0.5 N·m (44.3 ± 0.4 lb ft). 2. Gently tap around the clamps with a soft faced hammer. 3. Again tighten the clamp to 60.0 ± 0.5 N·m (44.3 ± 0.4 lb ft). |
| 3 | 12 | 5Y-1013 Nut | Before assembly, apply Loctite C5A Copper Anti-Seize to the threads. Torque to 25 ± 5 N·m (221 ± 44 lb in). |
| 4 | 12 | 5Y-1013 Nut | Before assembly, apply Loctite C5A copper anti-seize to the threads. Torque to 20 ± 5 N·m (177 ± 44 lb in). |
Caterpillar Information System:
G3500 A3 Engines Turbocharger
C13 Tier 4 Final Engines Exhaust Lines
G3512H and G3516H Generator Set Engines Housing (Front) - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Pump - Remove and Install
G3512H and G3516H Generator Set Engines Prelubrication Oil Pump - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft - Remove and Install
2013/04/25 Clarification Of The Service Interval For The Connecting Rod Bearings For Certain C175-16 Marine Engines {1219}
3500 Engines Exhaust Elbow
Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159} Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159}
G3512H and G3516H Generator Set Engines Camshaft - Remove and Install
3512B and 3512C Petroleum Generator Set Engines Air Cleaner
G3512H and G3516H Generator Set Engines Cylinder Liner - Remove and Install
G3500 A3 Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
G3500 A3 Engines Prelube Pump
G3500 A3 Engines Balancer Group (Front)
G3500B Engines Exhaust Manifold
G3516 Engines Flywheel
C175-16 Locomotive Engine Electronic Control Module (ECM)
C175-16 Locomotive Engine Fuel System Operation
C175-16 Locomotive Engine Lubrication System Operation
G3500 Engines Flywheel
C175-16 Locomotive Engine Finding the Top Center Position for the No. 1 Piston
G3500J Petroleum Engines Flywheel Housing Cover