Engine Oil Pump - Remove and Install
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 5P-3975 | 橡胶润滑剂 | - |
开始:
- 拆下发动机机油冷却器。
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
- 拆下螺栓 (1) 和管组件 (2)。
- 拆卸螺栓 (3) 和接头 (4)。
Show/hide table
图 2 g03714331 - 将适当的起吊设备连接在发动机油泵 (5) 上。 发动机机油泵 (5) 的重量约为
36 kg (80 lbs) 。 - 卸下螺栓 (6)、 (7) 和 (8)。 拆下发动机机油泵 (5)。
Show/hide table
| |
| 图 1 | g03714316 |
- 按与拆卸相反的顺序安装发动机机油泵 (5)。
- 用工具 (A) 润滑 O 形密封圈。
Caterpillar Information System:
G3512H and G3516H Generator Set Engines Prelubrication Oil Pump - Remove and Install
G3512H and G3516H Generator Set Engines Crankshaft - Remove and Install
2013/04/25 Clarification Of The Service Interval For The Connecting Rod Bearings For Certain C175-16 Marine Engines {1219}
3500 Engines Exhaust Elbow
Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159} Bench Test Procedure for a CX48-P2300 Transmission {0599, 0717, 3003, 3030, 3101, 3159}
G3512H and G3516H Generator Set Engines Camshaft - Remove and Install
3512B and 3512C Petroleum Generator Set Engines Air Cleaner
G3512H and G3516H Generator Set Engines Cylinder Liner - Remove and Install
2013/11/25 A New Heavy-Duty Aftercooler is Available for Certain C32 Commercial Marine Engines Operating in Seawater {1063}
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electronic Service Tools
G3512H and G3516H Generator Set Engines Pistons and Connecting Rods - Remove and Install
3500 Engines Camshaft
G3512H and G3516H Generator Set Engines Housing (Front) - Remove and Install
C13 Tier 4 Final Engines Exhaust Lines
G3500 A3 Engines Turbocharger
G3500B Engines Turbocharger
G3500 A3 Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
G3500 A3 Engines Prelube Pump
G3500 A3 Engines Balancer Group (Front)
G3500B Engines Exhaust Manifold
G3516 Engines Flywheel
C175-16 Locomotive Engine Electronic Control Module (ECM)
C175-16 Locomotive Engine Fuel System Operation