3500 Engines Caterpillar


Duplex Engine Oil Filters

Usage:

3516B JCH


Illustration 1g06323338

Table 1
Item  Qty  Part  Specification Description 
165-3931 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)
0T-0573 Bolt  Torque to 55 ± 7 N·m (41 ± 5 lb ft)
2N-3479 Screw  Torque to 2.3 ± 0.5 N·m (20 ± 4 lb in)
2W-1635 Spring  Length under test force is 102.0 mm (4.02 inch)
Test force is 518 ± 26 N (116 ± 6 lb).
Free length after test is 143.4 mm (5.65 inch).
2W-1969 Bypass Valve  The bypass valve must move freely in the bore.
Start to open pressure is 287 ± 7 kPa (42 ± 1 psi).
Fully open pressure is 480 ± 7 kPa (70 ± 1 psi)
4W-0290 Valve As  Final install torque is 12 ± 1.2 N·m (106 ± 10.6 lb in)
5B-9079 Jam Nut  Torque to 30 ± 5 N·m (266 ± 44 lb in)
7X-7875 Rod End  Before assembly, fill with green 1P-0808 Multipurpose Grease. 


Illustration 2g06323340

Table 2
Item  Qty  Part  Specification Description 
5H-7225 Retainer Nut  Torque to 4 ± 3 N·m (35 ± 27 lb in)
10  3B-7329 Nut  Torque to 4 ± 3 N·m (35 ± 27 lb in)
11  9M-2610 O-Ring Seal  Lubricate lightly with lubricant that is being sealed. 

Caterpillar Information System:

C15 and C18 Industrial Engines Flywheel Housing
C3.3B and C3.8 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Remove and Install
C32 Marine Generator Set Fumes Disposal Filter Service Indicator - Check
C32 Marine Generator Set Fumes Disposal Filter Element - Replace
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Pinion Shaft - Remove and Install
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Gear (Bull) - Remove and Install
C32 Marine Generator Set Maintenance Interval Schedule
374F Excavator System Pressure Release
C11 and C13 Engines Engine Oil Filter Base
3500 Engines Air Lines
C13 Tier 4 Final Engines Engine to Transmission Adapter
C15 and C18 Industrial Engines Flywheel Housing
3500B Generator Set Engines Radiator
C15 and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Flush
Retrofitting the Dynamic Gas Blending Capability for Certain 3512B Off-Highway Truck Engines {1000, 1250, 7000} Retrofitting the Dynamic Gas Blending Capability for Certain 3512B Off-Highway Truck Engines {1000, 1250, 7000}
TA2 Technical Inspection for 3516B Dynamic Gas Blending Genset Engines{1000} TA2 Technical Inspection for 3516B Dynamic Gas Blending Genset Engines{1000}
3500B Generator Set Engines Turbocharger Oil Lines
2013/09/27 Replacement of the Variable Valve Actuator Assembly at Overhaul Is Recommended on Certain On-Highway Truck Engines {1130}
3500B Generator Set Engines Air Lines
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Tank
C18 Industrial Engine Air Inlet and Exhaust System
2013/04/10 Recommendations for Checking the Alignment of Soft Mounted 3500 Generator Sets {1152, 1801, 4471}
C7.1 Generator Sets Additional Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.