C32 Marine Generator Set Caterpillar


Fumes Disposal Filter Element - Replace

Usage:

C32 RNF



图 1g02722994

C32 船用发电机组发动机的后视图

(1) 烟雾处理滤清器

(2) 烟雾处理滤清器盖

(3) 锁闩,用来将烟雾处理滤清器碳罐的顶部固定到碳罐罐体。

(4) 回流处理管路

  • 4 个锁闩,将各个烟雾处理滤清器的盖固定到各个烟雾处理滤清器的碳罐。 打开扣夹后拆下盖。


      注意

      在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。

      有关适于收集和盛放 Cat 产品油液的工具和用品,请参阅专门出版物, NENG2500, "Cat 代理商维修工具目录"或专门出版物, PECJ0003, "Cat 车间用品和工具目录"。

      按照本地法规和要求处置所有油液。


    1. 拆下使用过的烟雾处理滤清器并用新的烟雾处理滤清器更换它们。 旧滤清器中可能包含少量油。

    1. 复位盖。 通过固定扣夹将盖固定到滤罐上。



      图 2g02724450

      发动机左侧烟雾处理滤清器的视图

      (5) 回流处理管路的软管卡箍

    1. 松开将回流处理管路固定到滤罐上的卡箍。 检查回流处理管路并清除全部蓄积的液体。

    1. 复位回流处理管路后上紧软管卡箍。 关于正确的扭矩,请参阅技术规格, SENR3130, "扭矩技术规格"。

    1. 通过按下指示器底部的 "PUSH TO RESET(按下复位)"按钮复位烟雾处理滤清器的维修指示器。
  • Caterpillar Information System:

    WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Pinion Shaft - Remove and Install
    WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Gear (Bull) - Remove and Install
    C32 Marine Generator Set Maintenance Interval Schedule
    374F Excavator System Pressure Release
    C11 and C13 Engines Engine Oil Filter Base
    3500 Engines Air Lines
    C13 Tier 4 Final Engines Engine to Transmission Adapter
    G3500 Engines Alternator Mounting
    C13, C15, and C18 Tier 4 Final Engines Cylinder Block
    G3516 Engines Engine Oil Pan
    C9.3 Industrial Engine Flywheel Housing
    C9.3 Tier 4 Final Engines Flywheel Housing
    C32 Marine Generator Set Fumes Disposal Filter Service Indicator - Check
    WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Crosshead - Remove and Install
    C3.3B and C3.8 Engines for Caterpillar Built Machines Diagnostic Trouble Codes
    C15 and C18 Industrial Engines Flywheel Housing
    3500 Engines Duplex Engine Oil Filters
    C15 and C18 Industrial Engines Flywheel Housing
    3500B Generator Set Engines Radiator
    C15 and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank - Flush
    Retrofitting the Dynamic Gas Blending Capability for Certain 3512B Off-Highway Truck Engines {1000, 1250, 7000} Retrofitting the Dynamic Gas Blending Capability for Certain 3512B Off-Highway Truck Engines {1000, 1250, 7000}
    TA2 Technical Inspection for 3516B Dynamic Gas Blending Genset Engines{1000} TA2 Technical Inspection for 3516B Dynamic Gas Blending Genset Engines{1000}
    3500B Generator Set Engines Turbocharger Oil Lines
    2013/09/27 Replacement of the Variable Valve Actuator Assembly at Overhaul Is Recommended on Certain On-Highway Truck Engines {1130}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.