3516C Petroleum Well Service Engine Caterpillar


Refill Capacities

Usage:

3516C JB6

润滑剂容量

发动机润滑系统的容量包括工厂安装的机油滤清器的容量。 辅助机油滤清器系统(如有配备)需要额外的机油。 参考由辅助机油滤清器系统 OEM(原设备制造厂家)提供的使用说明。

表 1
3516C 润滑系统的近似加注容量    
    容量(不包括滤清器更换)     容量(包括滤清器更换)    
标准 250Hr 前油池    
151.4 L (40 US gal)    

181.7 L (48 US gal)    
标准 250Hr 后油池    
159 L (42 US gal)    

189.3 L (50 US gal)    
深 500Hr 前油池    
270.7 L (71.5 US gal)    

300.9 L (79.5 US gal)    

冷却液容量

为了正确保养冷却系统,必须确定冷却系统总容量。 冷却系统的总容量将随安装的设备不同而变化。 冷却系统的总容量可包括以下部件:发动机, 膨胀箱, 热交换器, 散热器 和 管道。

参考由 Caterpillar或安装设备的原始设备制造商(OEM)提供的规范。 在下列表格中记录冷却系统的总容量。

表 2
3516C 冷却系统的近似加注容量    
腔室或系统     容量    
水套水系统    
233 L (61.6 US gal)    
独立回路后冷器    
56.8 L (15.0 US gal)    
外部系统 (1)        
冷却系统总容量        
( 1 ) 外部系统容量由 OEM 安装决定。

Caterpillar Information System:

3516C Petroleum Well Service Engine Product Description
3516C HD Petroleum Well Service Engine Maintenance Interval Schedule
2013/02/13 An Improved Transmission Planetary Shaft is Used on Certain CX31 On-Highway Transmissions {3160, 7620}
320E and 323E Excavators Machine System Specifications Boom Lines
320 GC, 320 and 323 Excavator Machine Systems Specifications Transport Lock
C32 Auxiliary Engine Overhaul (Major)
C32 Auxiliary Engine Bolts (Fuel Filter Base) - Inspect/Replace
2013/03/05 New Helical Gears are Used on Certain 3500 Engines {1204}
Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308} Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308}
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
2013/02/01 Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/01/31 Anti-Splash Tape is Available for use with Current Fuel Line Shield Groups used on 3500 Machine Engines {1067, 1252}
2013/02/01 New Inlet Air Tube Assembly Is Used for 3512C Tier 3 Marine Engines {1071}
2013/03/13 New Inlet Air Tube Assembly Is Used for 3512C and 3516C Large Frame Tier 3 Marine Engines {1071}
3516C Petroleum Well Service Engine Monitoring System
C7.1 Industrial Engine General Hazard Information
312F and 313F Excavator Machine System Specifications Cab
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
525D, 535D, 545D, 555D Wheel Skidder High Pressure Fuel Lines
C7.1 Industrial Engine Electrical System
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Data Link Configuration Status - Test
3516C HD Petroleum Well Service Engines Sensor Signal (Analog, Active) - Test
2013/02/18 New Electronic Thermostats Are Used for C175 Engines {135V, 7610}
2013/03/22 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3512C and 3516C Engines {1379, 7553}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.