3516C Petroleum Well Service Engine Caterpillar


Product Description

Usage:

3516C JB6
3516C HD 油井用发动机是一台电控柴油发动机。 发动机配备独立回路后冷式(SCAC)设备。 该发动机设计用于油井应用。

发动机的效率和发动机的性能取决于是否遵守正确操作和保养建议。 使用建议使用的燃油、润滑油和冷却液。 对空气滤清器、燃油系统、润滑系统 和冷却系统的保养应给予特别的注意。 关于保养事项的其他资料,请查阅操作和保养手册, "保养周期表"。




图 1g00308357

3516C 发动机

(A) 进气门

(B) 排气门

(C) 飞轮

Caterpillar Information System:

3516C HD Petroleum Well Service Engine Maintenance Interval Schedule
2013/02/13 An Improved Transmission Planetary Shaft is Used on Certain CX31 On-Highway Transmissions {3160, 7620}
320E and 323E Excavators Machine System Specifications Boom Lines
320 GC, 320 and 323 Excavator Machine Systems Specifications Transport Lock
C32 Auxiliary Engine Overhaul (Major)
C32 Auxiliary Engine Bolts (Fuel Filter Base) - Inspect/Replace
2013/03/05 New Helical Gears are Used on Certain 3500 Engines {1204}
Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308} Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308}
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
2013/02/01 Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/01/31 Anti-Splash Tape is Available for use with Current Fuel Line Shield Groups used on 3500 Machine Engines {1067, 1252}
C7.1 Industrial Engine Safety Messages
3516C Petroleum Well Service Engine Refill Capacities
2013/02/01 New Inlet Air Tube Assembly Is Used for 3512C Tier 3 Marine Engines {1071}
2013/03/13 New Inlet Air Tube Assembly Is Used for 3512C and 3516C Large Frame Tier 3 Marine Engines {1071}
3516C Petroleum Well Service Engine Monitoring System
C7.1 Industrial Engine General Hazard Information
312F and 313F Excavator Machine System Specifications Cab
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
525D, 535D, 545D, 555D Wheel Skidder High Pressure Fuel Lines
C7.1 Industrial Engine Electrical System
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Data Link Configuration Status - Test
3516C HD Petroleum Well Service Engines Sensor Signal (Analog, Active) - Test
2013/02/18 New Electronic Thermostats Are Used for C175 Engines {135V, 7610}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.