New Helical Gears are Used on Certain 3500 Engines {1204}
- Engine:
- 3512C (S/N: MLM1-UP)
- 3516B (S/N: TRE1-UP)
Description of Change: The new helical gears are machined with a ground tooth profile. The gear load is distributed across the ground profile making the gears more robust.
Adaptable To: The new gears are adaptable back to first production of the engines listed above. Refer to the parts listed in Table 1.
The new helical gears are effective with MLM00229.
Show/hide table
Parts List     | ||
---|---|---|
Qty     | New Parts     | Former Parts     |
2     | 368-6914 Camshaft Drive Gear     | 101-1369 Camshaft Drive Gear     |
175-5201 Camshaft Gear | ||
1     | 368-9011 Idler Gear As     | 133-5992 Idler Gear As     |
2     | 369-9356 Idler Gear As     | 101-1364 Idler Gear As     |
175-5197 Idler Gear As | ||
1     | 369-9357 Idler Gear As     | 114-3372 Cluster Gear Assembly     |
175-5200 Idler Gear As | ||
2     | 417-0757 Camshaft Drive Gear     | 362-2834 Camshaft Drive Gear     |
Caterpillar Information System:
Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308} Engine Oil Hose Failures on Certain Excavators Equipped with C13 Engines{1308}
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
2013/02/01 Anti-Splash Tape is Available for Use with Current Fuel Line Shield Groups for 3500 Engines {1067, 1252}
2013/01/31 Anti-Splash Tape is Available for use with Current Fuel Line Shield Groups used on 3500 Machine Engines {1067, 1252}
C7.1 Industrial Engine Safety Messages
320 GC, 320 and 323 Excavator Machine Systems Specifications Bucket Cylinder Lines
C1.5 and C2.2 Industrial Engines Fuel Pump Relay Circuit - Test
320E and 323E Excavators Machine System Specifications Bucket Cylinder Lines
3500 Generator Set Engines Ether Starting Aid
3500 Engines Piston Cooling Jets - Remove and Install - Dynamic Gas Blending
3500 Engines Engine Oil Cooler - Install - Dynamic Gas Blending
3500 Engines Fuel Pressure Sensor - Remove and Install - Dynamic Gas Blending
C32 Auxiliary Engine Bolts (Fuel Filter Base) - Inspect/Replace
C32 Auxiliary Engine Overhaul (Major)
320 GC, 320 and 323 Excavator Machine Systems Specifications Transport Lock
320E and 323E Excavators Machine System Specifications Boom Lines
2013/02/13 An Improved Transmission Planetary Shaft is Used on Certain CX31 On-Highway Transmissions {3160, 7620}
3516C HD Petroleum Well Service Engine Maintenance Interval Schedule
3516C Petroleum Well Service Engine Product Description
3516C Petroleum Well Service Engine Refill Capacities
2013/02/01 New Inlet Air Tube Assembly Is Used for 3512C Tier 3 Marine Engines {1071}
2013/03/13 New Inlet Air Tube Assembly Is Used for 3512C and 3516C Large Frame Tier 3 Marine Engines {1071}
3516C Petroleum Well Service Engine Monitoring System
C7.1 Industrial Engine General Hazard Information