Water Temperature Regulator
Show/hide table
Illustration 1 | g00877006 |
Typical example |
Opening temperature of the water temperature regulator
- C1.5 (Turbocharged) ...
80° to 84°C (176° to 183°F)
- C2.2 (Naturally Aspirated) ...
80° to 84°C (176° to 183°F)
- C2.2 (Turbocharged) ...
82 °C (180 °F)
Fully open temperature of the water temperature regulator
- C1.5 ...
95 °C (203 °F)
- C2.2 (Naturally Aspirated) ...
95 °C (203 °F)
- C2.2 (Turbocharged) ...
95 °C (203 °F)
Show/hide table
Illustration 2 | g00820265 |
Typical example |
Show/hide table
Illustration 3 | g01114379 |
Water temperature regulator for naturally aspirated engines |
Show/hide table
Illustration 4 | g01114381 |
Water temperature regulator for turbocharged engines |
Note: Ensure that the water temperature regulator is seated correctly in the housing.
Note: Ensure that the jiggle pin (1) on the water temperature regulator is correctly positioned. Refer to illustrations 3 and 4.
(1) For C1.5 and C2.2 engines, tighten the two setscrews for the water temperature regulator housing to the following torque. ...
(2) Cover
(3) Water temperature regulator
(4) Gasket
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head Valves
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Block
3500 Marine Engines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
C1.5 and C2.2 Engines for Caterpillar Built Machines Main Bearing Journal
3516B Engine for the MT4400D Off-Highway Truck Gear Group (Rear)
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft
C1.5 and C2.2 Engines for Caterpillar Built Machines Valve Mechanism Cover
C175-16 Locomotive Engine Component Location
C175-16 Locomotive Engine Inlet Manifold
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555} O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451} Failure of Digital Communication Unit (DCU) Crank Output on Certain Cat® Engines{7451}
Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250} Set up Procedure for the Low-Pressure Fuel System of 3600 and C280 Diesel Engines{1250}
C18 Marine Auxiliary and Marine Generator Set Engines Cooling System
C1.5 and C2.2 Engines for Caterpillar Built Machines Gear Group (Front)
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Nozzles
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Pump
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Manifold
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch
C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator and Regulator