Engine Harness
Show/hide table
 | |
| Illustration 1 | g03323857 |
Left side view of engine | |
Show/hide table
| Specification for 322-3411 Engine Wiring Gp | |||
| Item | Qty | Part | Specification Description |
| Before assembly, apply blue Loctite 242 to the threads. | |||
| 1 | - | - | Tighten all plastic M12 nuts to 1.0 ± 0.5 N·m (8.9 ± 4.4 lb in). |
| 2 | - | - | Tighten all plastic M16 nuts to 3.0 ± 0.5 N·m (26.6 ± 4.4 lb in). |
| 3 | - | - | Tighten all plastic M40 nuts to 15 ± 1 N·m (133 ± 9 lb in). |
| 4 | - | - | Tighten all plastic M20 nuts to 5 ± 1 N·m (44 ± 9 lb in). |
| 5 | - | - | Tighten the 70 pin connector to 6 ± 1 N·m (53 ± 9 lb in). |
Caterpillar Information System:
C175-16 Marine Engine Engine Harness
C175-16 Marine Engine Flywheel
C1.5 and C2.2 Industrial Engines Solenoid Valve - Test
C175-16 Locomotive Engine Engine Oil Pan
Inspection and Cleaning Procedure For Certain Uninterruptible Power Supplies{4480} Inspection and Cleaning Procedure For Certain Uninterruptible Power Supplies{4480}
3516B Engine Overhaul (Top End)
3516B Engine Water Temperature Regulators - Remove
2013/06/19 An Improved Air Conditioner Condenser Fan Motor is Available for Certain Excavators {1805}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Shutoff - Test
CG137-08 and CG137-12 Engines Turbocharger - Remove and Install - G3408B
G3500 A3 Engines Air/Fuel Ratio Control - Adjust - NO<SUB>X</SUB> Feedback
3516B Engine Fuel Injector - Check
2012/12/21 New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
TA2 Inspection for C175-16 and C175-20 Engines{1000} TA2 Inspection for C175-16 and C175-20 Engines{1000}
C175-16 Marine Engine Generator Coupling
C27 and C32 Industrial Engines Coolant (ELC) - Change
421-9726 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 421-9726 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain C175-16 Generator Sets{1050, 1091} Assembling and Installing a Selective Catalytic Reduction (SCR) Module for Certain C175-16 Generator Sets{1050, 1091}
3516B Engine Water Temperature Regulators - Install
Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines{1250, 1280} Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines{1250, 1280}
3516B Engine Air Conditioner Compressor - Remove and Install
C27 and C32 Industrial Engines and C32 Petroleum Engine Refill Capacities
C175-16 Locomotive Engine Electrical Connectors
C175-16 Locomotive Engine Configuration Parameters