Air Inlet and Exhaust Lines
Show/hide table
图 1 | g01614656 |
典型示例 发动机右视图 |
Show/hide table
图 2 | g02551138 |
典型示例 螺栓拧紧顺序 |
Show/hide table
技术规格 - 261-7281 空气管路总成和 268-0015 空气管路总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | - | - | 装配前,用甘油或经认可的等效物稍稍润滑 O 形密封圈孔。 |
2 | 6 | 8J-5985 螺栓 | 采用以下步骤组装后冷器组件并拧紧螺栓:
1. 将密封组装到后冷器芯上。 2. 临时用胶带将底部密封固定在后冷器上。 不要使用粘接剂、硅润滑剂或任何其它润滑剂来固定密封。 3. 将装了密封的后冷器组装到进气歧管上。 4. 检查底部密封,以确保密封正确座入凹槽内。 5. 安装后冷器盖。 6. 检查顶部密封,以确保密封正确座入凹槽内。 7. 安装盖螺栓。 用手拧紧盖螺栓。 8. 按照图 2 中所示的数字顺序拧紧螺栓至扭矩 9. 按照图 2 中所示的数字顺序将螺栓再次拧紧至 10. 拆下胶带。 |
3 | 2 | 3J-5389 塞 | 组装前,使用 Loctite C5A 铜防咬合剂润滑螺纹。 |
拧紧至扭矩为 |
Caterpillar Information System:
3500B Engines for Caterpillar Built Power Modules Air Lines
C15 Petroleum Engines Exhaust Manifold
C9.3 Tier 4 Final Engines Electronic Unit Injector Wiring
3500 Engines Air Lines
2012/11/14 A New Check Valve Is Used for the Fuel Return on C175-16 Generator Set Engines {1250}
C15 Petroleum Generator Set Maintenance Interval Schedule
C27 Generator Set Engine Oil and Filter - Change
C15 Petroleum Engine General Information
2015/09/17 New Cylinder Pack Assemblies Are Available in Sets for Certain C18 Engines {1201, 1216, 1225, 1239}
2011/05/26 New Cylinder Pack Assemblies Are Available in Sets for Certain Machines Equipped with C18 Engines {1201, 1216, 1225, 1239}
C13, C15, and C18 Tier 4 Final Engines Exhaust Gas Valve (NRS)
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280} NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
3500 Engines Air Inlet and Exhaust Lines
C175-16 and C175-20 Generator Set Engines Fuel Injector
797F and 797F XQ Off-Highway Truck Hydraulic Fan System System Pressure - Release
C15 Petroleum Engines Fan Drive
XQ400 Power Module Control Panel
C175-16 Petroleum Generator Set Engines Air Prelube Pump Lubricator Bowl - Clean
CG137-08 and CG137-12 Engines Configuration Parameters
Procedure for Installing a Redesigned Jacket Water System on Certain C15 and C18 Generator Sets{1350, 1380, 1383} Procedure for Installing a Redesigned Jacket Water System on Certain C15 and C18 Generator Sets{1350, 1380, 1383}
C15 Petroleum Engines Configuration Parameters
3500 Engines Air Inlet and Exhaust Lines
3500 Engines Air Inlet and Exhaust Lines
3500 Engines Air Inlet and Exhaust Lines