Aftercooler - Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seals, adapter (8), and bolts (7).
Show/hide table
Illustration 2 g02442883 - Attach Tooling (A) and a suitable lifting device to the top of aftercooler (3). The weight of aftercooler (3) is approximately
50 kg (110 lb) . - Place the O-ring seal and aftercooler (3) in position.
- Apply a clean coat of oil to bolts (4). Install bolts (4).
- Connect hose (6) to aftercooler (3) and install band clamp (5). Tighten band clamp (5) to a torque of
7.3 ± 0.5 N·m (65 ± 4 lb in) . - Connect hose (2) to aftercooler (3) and install band clamps (1).
- Fill the auxiliary cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
| |
| Illustration 1 | g02442918 |
Caterpillar Information System:
C15 Petroleum Engines Aftercooler - Remove
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Interfaces
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Pager Configuration
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Initial Startup Procedure
2011/06/16 New Fuel Pressure Regulators Are Used on Certain C7 and C9 Engines {1715}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Electrical Connections
UPSB505 Uninterruptible Power Supply Cable Size Requirement
C15 Petroleum Engines Auxiliary Water Pump - Assemble
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
2011/03/02 New Software Is Used on C175-16 Generator Sets {1901, 1920}
C15 Petroleum Engines Auxiliary Water Pump - Disassemble
C15 Petroleum Engines Installation Environment
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Remote Status Panel
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Site Preparation
UPSB505 Uninterruptible Power Supply System Earthing Arrangement
Data link J1939 on EMCP 3.2 and EMCP 3.3 Fails to Communicate on Certain Generator Sets{4490} Data link J1939 on EMCP 3.2 and EMCP 3.3 Fails to Communicate on Certain Generator Sets{4490}
UPSB505 Uninterruptible Power Supply Glossary
C15 Petroleum Engines Belts - Inspect/Replace
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Troubleshooting
2011/03/02 New Improved Software for High Ambient Temperature Derates Is Now Used on Certain Hazardous Location C7 and C9 Petroleum Engines {1901, 1920}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Wireway
General Cleaning Methods {1000, 7000} General Cleaning Methods {1000, 7000}
300.9D and 300.9D VPS Mini Hydraulic Excavator Operation Information