Crankshaft Gear - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8B-7551     | Bearing Puller     | 1     |
8B-7549 | Puller Leg     | 2     | |
3H-0465 | Push-Puller Plate     | 4     | |
6B-6682 | Full Nut     | 2     | |
8B-7560 | Step Plate     | 1     | |
1P-0820 | Hydraulic Puller     | 1     | |
9U-6600 | Hand Hydraulic Pump     | 1     |
Start By:
- Remove the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) in order to remove crankshaft gear (3) from crankshaft (1) .
Show/hide table
Illustration 1 | g00988783 |
- Remove woodruff key (2) from crankshaft (1) .
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position woodruff key (2) in crankshaft (1) .
Show/hide table
Illustration 2 | g00988783 |
Show/hide table
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin. |
- Raise the temperature of crankshaft gear (3). Install crankshaft gear (3) on crankshaft (1) .
End By: Install the crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Install".
Caterpillar Information System:
C7 Engine for Combat and Tactical Vehicles Crankshaft - Install
C7 Engine for Combat and Tactical Vehicles Crankshaft - Remove
C7 Engine for Combat and Tactical Vehicles Crankshaft Main Bearings - Install
C7 Engine for Combat and Tactical Vehicles Crankshaft Main Bearings - Remove
C7 Engine for Combat and Tactical Vehicles Connecting Rod Bearings - Install
C7 Engine for Combat and Tactical Vehicles Connecting Rod Bearings - Remove
C7 Engine for Combat and Tactical Vehicles Pistons and Connecting Rods - Install
C7 Engine for Combat and Tactical Vehicles Pistons and Connecting Rods - Assemble
C7 Engine for Combat and Tactical Vehicles Pistons and Connecting Rods - Disassemble
C7 Engine for Combat and Tactical Vehicles Pistons and Connecting Rods - Remove
C7 Engine for Caterpillar Built Machine Piston Cooling Jets - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Oil Pan - Remove and Install
C7 Engine for Combat and Tactical Vehicles Bearing Clearance - Check
C9 Marine Auxiliary and Generator Set Engines Emissions Certification Film
C7 Engine for Combat and Tactical Vehicles Atmospheric Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Coolant Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Oil Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Injection Actuation Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Speed/Timing Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Boost Pressure Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Inlet Air Temperature Sensor - Remove and Install
C7 Engine for Combat and Tactical Vehicles Fan Drive Mounting Group - Remove and Install
C7 Engine for Combat and Tactical Vehicles Engine Control Module - Remove and Install
C7 Engine for Combat and Tactical Vehicles Alternator - Remove and Install